lkml.org 
[lkml]   [2020]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next v3 0/2] Enable Fiber on DP83822 PHY
From
From: Dan Murphy <dmurphy@ti.com>
Date: Thu, 27 Aug 2020 08:45:07 -0500

> The DP83822 Ethernet PHY has the ability to connect via a Fiber port. The
> derivative PHYs DP83825 and DP83826 do not have this ability. In fiber mode
> the DP83822 disables auto negotiation and has a fixed 100Mbps speed with
> support for full or half duplex modes.
>
> A devicetree binding was added to set the signal polarity for the fiber
> connection. This property is only applicable if the FX_EN strap is set in
> hardware other wise the signal loss detection is disabled on the PHY.
>
> If the FX_EN is not strapped the device can be configured to run in fiber mode
> via the device tree. All be it the PHY will not perform signal loss detection.
>
> v2 review from a long time ago can be found here - https://lore.kernel.org/patchwork/patch/1270958/

Series applied, thank you.

\
 
 \ /
  Last update: 2020-08-28 16:08    [W:0.047 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site