lkml.org 
[lkml]   [2020]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH 2/2] ARM: dts: imx6qdl: tqma6: minor fixes
From
Date
On Wed, 2020-08-26 at 07:59 -0300, Fabio Estevam wrote:
> Hi Matthias,
>
> On Wed, Aug 26, 2020 at 7:32 AM Matthias Schiffer
> <matthias.schiffer@ew.tq-group.com> wrote:
>
> > But the previous platform data that was removed in 8cdcd8aeee281
> > ("spi:
> > imx/fsl-lpspi: Convert to GPIO descriptors") set different values
> > for
> > different boards. So maybe some DTS should be using num-cs?
>
> Could you provide an example of an imx dts that should use num-cs?

I'm not sure, does anything break when num_chipselect is set too high?

Before 8cdcd8aeee281, num_chipselect was set to 3 for spi0 and to 1 for
spi1 in arch/arm/mach-imx/mach-mx31lite.c. My understanding is that it
would make sense to add this as num-cs to
arch/arm/boot/dts/imx31-lite.dts.


\
 
 \ /
  Last update: 2020-08-26 13:56    [W:0.158 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site