lkml.org 
[lkml]   [2020]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi: esas2r: fix possible buffer overflow caused by bad DMA value in esas2r_process_fs_ioctl()
Date
In esas2r_read_fs():
struct esas2r_ioctl_fs *fs =
(struct esas2r_ioctl_fs *)a->fs_api_buffer;

Because "a->fs_api_buffer" is mapped to coherent DMA (allocated in
esas2r_write_fs()), "fs" is also mapped to DMA.

Then esas2r_read_fs() calls esas2r_process_fs_ioctl() with "fs".

In esas2r_process_fs_ioctl():
fsc = &fs->command;
...
if (fsc->command >= cmdcnt) {
fs->status = ATTO_STS_INV_FUNC;
return false;
}
func = cmd_to_fls_func[fsc->command];
if (func == 0xFF) {
fs->status = ATTO_STS_INV_FUNC;
return false;
}

Because "fs" is mapped to DMA, its data can be modified at anytime by
malicious or malfunctioning hardware. In this case, the check
"if (fsc->command >= cmdcnt)" can be passed, and then "fsc->command"
can be modified by hardware to cause buffer overflow.

To fix this problem, "fsc->command" is assigned to a local variable, and
then this local variable is used to replace "fsc->command".

Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
---
drivers/scsi/esas2r/esas2r_flash.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/esas2r/esas2r_flash.c b/drivers/scsi/esas2r/esas2r_flash.c
index b02ac389e6c6..ca5ff0d4c7d0 100644
--- a/drivers/scsi/esas2r/esas2r_flash.c
+++ b/drivers/scsi/esas2r/esas2r_flash.c
@@ -851,6 +851,7 @@ bool esas2r_process_fs_ioctl(struct esas2r_adapter *a,
struct esas2r_ioctlfs_command *fsc = &fs->command;
u8 func = 0;
u32 datalen;
+ u8 command = fsc->command;

fs->status = ATTO_STS_FAILED;
fs->driver_error = RS_PENDING;
@@ -860,18 +861,18 @@ bool esas2r_process_fs_ioctl(struct esas2r_adapter *a,
return false;
}

- if (fsc->command >= cmdcnt) {
+ if (command >= cmdcnt) {
fs->status = ATTO_STS_INV_FUNC;
return false;
}

- func = cmd_to_fls_func[fsc->command];
+ func = cmd_to_fls_func[command];
if (func == 0xFF) {
fs->status = ATTO_STS_INV_FUNC;
return false;
}

- if (fsc->command != ESAS2R_FS_CMD_CANCEL) {
+ if (command != ESAS2R_FS_CMD_CANCEL) {
if ((a->pcid->device != ATTO_DID_MV_88RC9580
|| fs->adap_type != ESAS2R_FS_AT_ESASRAID2)
&& (a->pcid->device != ATTO_DID_MV_88RC9580TS
--
2.17.1
\
 
 \ /
  Last update: 2020-08-02 17:23    [W:0.064 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site