lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] ASoC: Intel: Add period size constraint on strago board
Takashi Iwai <tiwai@suse.de> 於 2020年8月12日 週三 下午2:14寫道:
>
> On Wed, 12 Aug 2020 05:09:58 +0200,
> Yu-Hsuan Hsu wrote:
> >
> > Mark Brown <broonie@kernel.org> 於 2020年8月12日 週三 上午1:22寫道:
> > >
> > > On Tue, Aug 11, 2020 at 11:54:38AM -0500, Pierre-Louis Bossart wrote:
> > >
> > > > > constraint logic needs to know about this DSP limitation - it seems like
> > > > > none of this is going to change without something new going into the
> > > > > mix? We at least need a new question to ask about the DSP firmware I
> > > > > think.
> > >
> > > > I just tested aplay -Dhw: on a Cyan Chromebook with the Ubuntu kernel 5.4,
> > > > and I see no issues with the 240 sample period. Same with 432, 960, 9600,
> > > > etc.
> > >
> > > > I also tried just for fun what happens with 256 samples, and I don't see any
> > > > underflows thrown either, so I am wondering what exactly the problem is?
> > > > Something's not adding up. I would definitively favor multiple of 1ms
> > > > periods, since it's the only case that was productized, but there's got to
> > > > me something a side effect of how CRAS programs the hw_params.
> > >
> > > Is it something that goes wrong with longer playbacks possibly (eg,
> > > someone watching a feature film or something)?
> >
> > Thanks for testing!
> >
> > After doing some experiments, I think I can identify the problem more precisely.
> > 1. aplay can not reproduce this issue because it writes samples
> > immediately when there are some space in the buffer. However, you can
> > add --test-position to see how the delay grows with period size 256.
> > > aplay -Dhw:1,0 --period-size=256 --buffer-size=480 /dev/zero -d 1 -f dat --test-position
> > Playing raw data '/dev/zero' : Signed 16 bit Little Endian, Rate 48000
> > Hz, Stereo
> > Suspicious buffer position (1 total): avail = 0, delay = 2064, buffer = 512
> > Suspicious buffer position (2 total): avail = 0, delay = 2064, buffer = 512
> > Suspicious buffer position (3 total): avail = 0, delay = 2096, buffer = 512
> > ...
>
> Isn't this about the alignment of the buffer size against the period
> size, not the period size itself? i.e. in the example above, the
> buffer size isn't a multiple of period size, and DSP can't handle if
> the position overlaps the buffer size in a half way.
>
> If that's the problem (and it's an oft-seen restriction), the right
> constraint is
> snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
>
>
> Takashi
Oh sorry for my typo. The issue happens no matter what buffer size is
set. Actually, even if I want to set 480, it will change to 512
automatically.
Suspicious buffer position (1 total): avail = 0, delay = 2064, buffer
= 512 <-this one is the buffer size

>
> > 2. Since many samples are moved to DSP(delay), the measured rate of
> > the ring-buffer is high. (I measured it by alsa_conformance_test,
> > which only test the sampling rate in the ring buffer of kernel not
> > DSP)
> >
> > 3. Since CRAS writes samples with a fixed frequency, this behavior
> > will take all samples from the ring buffer, which is seen as underrun
> > by CRAS. (It seems that it is not a real underrun because that avail
> > does not larger than buffer size. Maybe CRAS should also take dalay
> > into account.)
> >
> > 4. In spite of it is not a real underrun, the large delay is still a
> > big problem. Can we apply the constraint to fix it? Or any better
> > idea?
> >
> > Thanks,
> > Yu-Hsuan
> >

\
 
 \ /
  Last update: 2020-08-12 08:54    [W:0.097 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site