lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/11] dt-bindings: extcon: ptn5150: Use generic "interrupts" property
Date
Interrupts do not have to be always GPIO based so instead of expecting
"int-gpios" property and converting the GPIO to an interrupt, just
accept any interrupt via generic "interrupts" property.

Mark the old "int-gpios" as deprecated.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/extcon/extcon-ptn5150.yaml | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index f6316f12028b..1ddc97db3e61 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -19,8 +19,13 @@ properties:
const: nxp,ptn5150

int-gpios:
+ deprecated: true
description:
GPIO pin (input) connected to the PTN5150's INTB pin.
+ Use "interrupts" instead.
+
+ interrupts:
+ maxItems: 1

reg:
maxItems: 1
@@ -31,7 +36,7 @@ properties:

required:
- compatible
- - int-gpios
+ - interrupts
- reg
- vbus-gpios

@@ -40,6 +45,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -47,7 +53,8 @@ examples:
ptn5150@1d {
compatible = "nxp,ptn5150";
reg = <0x1d>;
- int-gpios = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
};
};
--
2.17.1
\
 
 \ /
  Last update: 2020-08-12 18:31    [W:0.057 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site