lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] Input: atmel_mxt_ts - allow specification of firmware file name
From
Date
Hi Dmitry

On 2020/08/10 5:11, Dmitry Osipenko wrote:
> 31.07.2020 10:57, Jiada Wang пишет:
>> From: Nick Dyer <nick.dyer@itdev.co.uk>
>>
>> On platforms which have multiple device instances using this driver, the
>> firmware may be different on each device. This patch makes the user give
>> the name of the firmware file when flashing.
>>
>> This also prevents accidental triggering of the firmware load process.
>>
>> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
>> Acked-by: Benson Leung <bleung@chromium.org>
>> Acked-by: Yufeng Shen <miletus@chromium.org>
>> (cherry picked from ndyer/linux/for-upstream commit 76ebb7cee971cb42dfb0a3a9224403b8b09abcf1)
>> [gdavis: Forward port and fix conflicts.]
>> Signed-off-by: George G. Davis <george_davis@mentor.com>
>> Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
>> ---
>> drivers/input/touchscreen/atmel_mxt_ts.c | 42 ++++++++++++++++++++----
>> 1 file changed, 36 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
>> index a2189739e30f..024dee7a3571 100644
>> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
>> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
>> @@ -30,8 +30,6 @@
>> #include <media/videobuf2-v4l2.h>
>> #include <media/videobuf2-vmalloc.h>
>>
>> -/* Firmware files */
>> -#define MXT_FW_NAME "maxtouch.fw"
>> #define MXT_CFG_NAME "maxtouch.cfg"
>> #define MXT_CFG_MAGIC "OBP_RAW V1"
>>
>> @@ -308,6 +306,7 @@ struct mxt_data {
>> struct t7_config t7_cfg;
>> struct mxt_dbg dbg;
>> struct gpio_desc *reset_gpio;
>> + char *fw_name;
>
> Hello, Jiada!
>
> Have you decided to abandon the patch which allowed to specify firmware
> name in a device tree?
>
In v11 patch-set, there is a patch allows user to specify config file
name via device-tree and sysfs, I will drop device-tree part, since
Dmitry Torokhov commented he would like to change the behavior of
firmware loading during boot time,
but I will keep sysfs interface part, which is similar to this patch but
for configuration file.

>> /* Cached parameters from object table */
>> u16 T5_address;
>> @@ -2766,7 +2765,7 @@ static int mxt_check_firmware_format(struct device *dev,
>> return -EINVAL;
>> }
>>
>> -static int mxt_load_fw(struct device *dev, const char *fn)
>> +static int mxt_load_fw(struct device *dev)
>> {
>> struct mxt_data *data = dev_get_drvdata(dev);
>> const struct firmware *fw = NULL;
>> @@ -2776,9 +2775,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
>> unsigned int frame = 0;
>> int ret;
>>
>> - ret = request_firmware(&fw, fn, dev);
>> + ret = request_firmware(&fw, data->fw_name, dev);
>> if (ret) {
>> - dev_err(dev, "Unable to open firmware %s\n", fn);
>> + dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
>> return ret;
>> }
>>
>> @@ -2887,6 +2886,33 @@ static int mxt_load_fw(struct device *dev, const char *fn)
>> return ret;
>> }
>>
>> +static int mxt_update_file_name(struct device *dev, char **file_name,
>> + const char *buf, size_t count)
>> +{
>> + char *file_name_tmp;
>> +
>> + /* Simple sanity check */
>> + if (count > 64) {
>> + dev_warn(dev, "File name too long\n");
>> + return -EINVAL;
>> + }
>> +
>> + file_name_tmp = krealloc(*file_name, count + 1, GFP_KERNEL);
>> + if (!file_name_tmp)
>> + return -ENOMEM;
>
> The allocated string is never release, this is not good.
>
> Wouldn't it be nicer to make data->fw_name a fixed-size string?

OK, I will change to a fixed-size string

>
>> + *file_name = file_name_tmp;
>> + memcpy(*file_name, buf, count);
>> +
>> + /* Echo into the sysfs entry may append newline at the end of buf */
>> + if (buf[count - 1] == '\n')
>> + (*file_name)[count - 1] = '\0';
>> + else
>> + (*file_name)[count] = '\0';
>
> What about to use strscpy?
>
Thanks for the advice, I will replace with strscpy

>> + return 0;
>> +}
>> +
>> static ssize_t mxt_update_fw_store(struct device *dev,
>> struct device_attribute *attr,
>> const char *buf, size_t count)
>> @@ -2894,7 +2920,11 @@ static ssize_t mxt_update_fw_store(struct device *dev,
>> struct mxt_data *data = dev_get_drvdata(dev);
>> int error;
>>
>> - error = mxt_load_fw(dev, MXT_FW_NAME);
>> + error = mxt_update_file_name(dev, &data->fw_name, buf, count);
>> + if (error)
>> + return error;
>
> This change breaks old behavior, I'm not sure that it's acceptable. The
> default name should remain to be "maxtouch.fw", IMO.

it makes sense, I will update to write default "maxtouch.fw",
in case user doesn't specify a file name in sysfs write operation

Thanks,
Jiada
>
>> + error = mxt_load_fw(dev);
>> if (error) {
>> dev_err(dev, "The firmware update failed(%d)\n", error);
>> count = error;
>>
>

\
 
 \ /
  Last update: 2020-08-12 12:11    [W:0.063 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site