lkml.org 
[lkml]   [2020]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning
Date
Hi Tamseel,

> -----Original Message-----
> From: Tamseel Shams <m.shams@samsung.com>
> Sent: 10 August 2020 08:30
> To: kgene@kernel.org; krzk@kernel.org; gregkh@linuxfoundation.org;
> jslaby@suse.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org;
> linux-serial@vger.kernel.org; linux-kernel@vger.kernel.org;
> alim.akhtar@samsung.com; Tamseel Shams <m.shams@samsung.com>
> Subject: [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning
>
> In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP is having
> 2 interrupt lines.
> However, in other SoCs like s3c6400, s5pv210, exynos5433, and exynos4210
> UART is having only 1 interrupt line. Due to this, "platform_get_irq(platdev, 1)"
> call in the driver gives the following false-positive error:
> "IRQ index 1 not found" on newer SoC's.
>
> This patch adds the condition to check for Tx interrupt only for the those SoC's
> which have 2 interrupt lines.
>
> Signed-off-by: Tamseel Shams <m.shams@samsung.com>
> ---
Tested on exynos7 platform, don’t see " IRQ index 1 not found" with this patch applied
Fill free to added
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

> Commit message is changed.
>
> Added RFT, for older platform.
>
> Addressed Krzysztof's review comments [1] [1] ->
> https://lkml.org/lkml/2020/7/21/150
>
> drivers/tty/serial/samsung_tty.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 6ef614d8648c..b923683e6a25 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -1911,9 +1911,11 @@ static int s3c24xx_serial_init_port(struct
> s3c24xx_uart_port *ourport,
> ourport->tx_irq = ret + 1;
> }
>
> - ret = platform_get_irq(platdev, 1);
> - if (ret > 0)
> - ourport->tx_irq = ret;
> + if (!s3c24xx_serial_has_interrupt_mask(port)) {
> + ret = platform_get_irq(platdev, 1);
> + if (ret > 0)
> + ourport->tx_irq = ret;
> + }
> /*
> * DMA is currently supported only on DT platforms, if DMA properties
> * are specified.
> --
> 2.17.1




\
 
 \ /
  Last update: 2020-08-10 18:28    [W:0.169 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site