lkml.org 
[lkml]   [2020]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: R: [RFC PATCH v2 2/2] dt-bindings: cpufreq: Document Krait CPU Cache scaling
On Mon, Aug 10, 2020 at 01:15:24PM +0200, ansuelsmth@gmail.com wrote:
>
>
> > -----Messaggio originale-----
> > Da: Sudeep Holla <sudeep.holla@arm.com>
> > Inviato: lunedì 10 agosto 2020 10:02
> > A: Ansuel Smith <ansuelsmth@gmail.com>
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>; Rafael J. Wysocki
> > <rjw@rjwysocki.net>; Rob Herring <robh+dt@kernel.org>; linux-
> > pm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Oggetto: Re: [RFC PATCH v2 2/2] dt-bindings: cpufreq: Document Krait CPU
> > Cache scaling
> >
> > On Sat, Aug 08, 2020 at 01:49:12AM +0200, Ansuel Smith wrote:
> > > Document dedicated Krait CPU Cache Scaling driver.
> > >
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > > .../bindings/cpufreq/krait-cache-scale.yaml | 92
> > +++++++++++++++++++
> > > 1 file changed, 92 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-
> > cache-scale.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/cpufreq/krait-cache-
> > scale.yaml b/Documentation/devicetree/bindings/cpufreq/krait-cache-
> > scale.yaml
> > > new file mode 100644
> > > index 000000000000..f10b1f386a99
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/cpufreq/krait-cache-
> > scale.yaml
> > > @@ -0,0 +1,92 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/cpufreq/krait-cache-scale.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Krait Cpu Cache Frequency Scaling dedicated driver
> > > +
> > > +maintainers:
> > > + - Ansuel Smith <ansuelsmth@gmail.com>
> > > +
> > > +description: |
> > > + This Scale the Krait CPU Cache Frequency and optionally voltage
> > > + when the Cpu Frequency is changed (using the cpufreq notifier).
> > > +
> > > + Cache is scaled with the max frequency across all core and the cache
> > > + frequency will scale based on the configured threshold in the dts.
> > > +
> > > + The cache is hardcoded to 3 frequency bin, idle, nominal and high.
> > > +
> > > +properties:
> > > + compatible:
> > > + const: qcom,krait-cache
> > > +
> >
> > How does this fit in the standard cache hierarchy nodes ? Extend the
> > example to cover that.
> >
>
> I think i didn't understand this question. You mean that I should put
> in the example how the standard l2 cache nodes are defined?
>

I was referring to something like below which I found now in
arch/arm/boot/dts/qcom-msm8974.dtsi:
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
qcom,saw = <&saw_l2>;
};

> > > + clocks:
> > > + description: Phandle to the L2 CPU clock
> > > +
> > > + clock-names:
> > > + const: "l2"
> > > +
> > > + voltage-tolerance:
> > > + description: Same voltage tollerance of the Krait CPU
> > > +
> > > + l2-rates:
> > > + description: |
> > > + Frequency the L2 cache will be scaled at.
> > > + Value is in Hz.
> > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + items:
> > > + - description: idle
> > > + - description: nominal
> > > + - description: high
> > > +
> >
> > Why can't you re-use the standard OPP v2 bindings ?
> >
>
> Isn't overkill to use the OPP v2 bindings to represent the the microvolt
> related to the le freq? Is the OPP v1 sufficient?

Should be fine if it is allowed. v2 came out in the flow of my thought
and was not intentional.

> Also I can't find a way to reflect this specific case where the l2 rates
> are changed based on the cpu freq value? Any idea about that?
>

OK, I am always opposed to giving such independent controls in the kernel
as one can play around say max cpu freq and lowest cache or vice-versa
and create instabilities. IMO this should be completely hidden from OS.
But I know these are old platforms, so I will shut my mouth ;)

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2020-08-10 14:46    [W:0.037 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site