lkml.org 
[lkml]   [2020]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC v4 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
Date
Wesley Cheng <wcheng@codeaurora.org> writes:

Hi,

> Some devices have USB compositions which may require multiple endpoints
> that support EP bursting. HW defined TX FIFO sizes may not always be
> sufficient for these compositions. By utilizing flexible TX FIFO
> allocation, this allows for endpoints to request the required FIFO depth to
> achieve higher bandwidth. With some higher bMaxBurst configurations, using
> a larger TX FIFO size results in better TX throughput.

how much better? What's the impact? Got some real numbers of this
running with upstream kernel? I guess mass storage gadget is the
simplest one to test.

> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> index 6dee4dabc0a4..76db9b530861 100644
> --- a/drivers/usb/dwc3/ep0.c
> +++ b/drivers/usb/dwc3/ep0.c
> @@ -601,8 +601,9 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
> {
> enum usb_device_state state = dwc->gadget.state;
> u32 cfg;
> - int ret;
> + int ret, num, size;

no, no. Please one declaration per line.

> u32 reg;
> + struct dwc3_ep *dep;

Keep reverse xmas tree order.

> @@ -611,6 +612,40 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
> return -EINVAL;
>
> case USB_STATE_ADDRESS:
> + /*
> + * If tx-fifo-resize flag is not set for the controller, then
> + * do not clear existing allocated TXFIFO since we do not
> + * allocate it again in dwc3_gadget_resize_tx_fifos
> + */
> + if (dwc->needs_fifo_resize) {
> + /* Read ep0IN related TXFIFO size */
> + dep = dwc->eps[1];
> + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
> + if (dwc3_is_usb31(dwc))
> + dep->fifo_depth = DWC31_GTXFIFOSIZ_TXFDEP(size);
> + else
> + dep->fifo_depth = DWC3_GTXFIFOSIZ_TXFDEP(size);
> +
> + dwc->last_fifo_depth = dep->fifo_depth;
> + /* Clear existing TXFIFO for all IN eps except ep0 */
> + for (num = 3; num < min_t(int, dwc->num_eps,
> + DWC3_ENDPOINTS_NUM); num += 2) {
> + dep = dwc->eps[num];
> + /* Don't change TXFRAMNUM on usb31 version */
> + size = dwc3_is_usb31(dwc) ?
> + dwc3_readl(dwc->regs,
> + DWC3_GTXFIFOSIZ(num >> 1)) &
> + DWC31_GTXFIFOSIZ_TXFRAMNUM :
> + 0;
> +
> + dwc3_writel(dwc->regs,
> + DWC3_GTXFIFOSIZ(num >> 1),
> + size);
> + dep->fifo_depth = 0;
> + }
> + dwc->num_ep_resized = 0;

care to move this into a helper that you call unconditionally and the
helper returns early is !needs_fifo_resize?

> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 00746c2848c0..777badf3e85d 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -540,6 +540,117 @@ static int dwc3_gadget_start_config(struct dwc3_ep *dep)
> return 0;
> }
>
> +/*
> + * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
> + * @dwc: pointer to our context structure
> + *
> + * This function will a best effort FIFO allocation in order
> + * to improve FIFO usage and throughput, while still allowing
> + * us to enable as many endpoints as possible.
> + *
> + * Keep in mind that this operation will be highly dependent
> + * on the configured size for RAM1 - which contains TxFifo -,
> + * the amount of endpoints enabled on coreConsultant tool, and
> + * the width of the Master Bus.
> + *
> + * In general, FIFO depths are represented with the following equation:
> + *
> + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
> + *
> + * Conversions can be done to the equation to derive the number of packets that
> + * will fit to a particular FIFO size value.
> + */
> +static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
> +{
> + struct dwc3 *dwc = dep->dwc;
> + int ram1_depth, mdwidth, fifo_0_start, tmp, num_in_ep;
> + int min_depth, remaining, fifo_size, mult = 1, fifo, max_packet = 1024;

one declaration per line, also make sure you order it in reverse xmas
tree order.

> + if (!dwc->needs_fifo_resize)
> + return 0;
> +
> + /* resize IN endpoints except ep0 */
> + if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
> + return 0;
> +
> + /* Don't resize already resized IN endpoint */
> + if (dep->fifo_depth)

using fifo_depth as a flag seems flakey to me. What happens when someone
in the future changes the behavior below and this doesn't apply anymore?

Also, why is this procedure called more than once for the same endpoint?
Does that really happen?

> + return 0;
> +
> + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
> + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
> + /* MDWIDTH is represented in bits, we need it in bytes */
> + mdwidth >>= 3;
> +
> + if (((dep->endpoint.maxburst > 1) &&
> + usb_endpoint_xfer_bulk(dep->endpoint.desc))
> + || usb_endpoint_xfer_isoc(dep->endpoint.desc))
> + mult = 3;
> +
> + if ((dep->endpoint.maxburst > 6) &&
> + usb_endpoint_xfer_bulk(dep->endpoint.desc)
> + && dwc3_is_usb31(dwc))
> + mult = 6;
> +
> + /* FIFO size for a single buffer */
> + fifo = (max_packet + mdwidth)/mdwidth;

add spaces around integer division operator

> + fifo++;
> +
> + /* Calculate the number of remaining EPs w/o any FIFO */
> + num_in_ep = dwc->num_eps/2;
> + num_in_ep -= dwc->num_ep_resized;
> + /* Ignore EP0 IN */
> + num_in_ep--;
> +
> + /* Reserve at least one FIFO for the number of IN EPs */
> + min_depth = num_in_ep * (fifo+1);
> + remaining = ram1_depth - min_depth - dwc->last_fifo_depth;
> +
> + /* We've already reserved 1 FIFO per EP, so check what we can fit in

comment style is wrong

> + * addition to it. If there is not enough remaining space, allocate
> + * all the remaining space to the EP.
> + */
> + fifo_size = (mult-1) * fifo;

spaces around subtraction

> + if (remaining < fifo_size) {
> + if (remaining > 0)
> + fifo_size = remaining;
> + else
> + fifo_size = 0;
> + }
> +
> + fifo_size += fifo;
> + fifo_size++;

why the increment?

> + dep->fifo_depth = fifo_size;
> +
> + /* Check if TXFIFOs start at non-zero addr */
> + tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
> + fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp);
> +
> + fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16));
> + if (dwc3_is_usb31(dwc))
> + dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
> + else
> + dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
> +
> + /* Check fifo size allocation doesn't exceed available RAM size. */
> + if (dwc->last_fifo_depth >= ram1_depth) {
> + dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n",
> + (dwc->last_fifo_depth * mdwidth), ram1_depth,
> + dep->endpoint.name, fifo_size);
> + if (dwc3_is_usb31(dwc))
> + fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
> + else
> + fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
> + dwc->last_fifo_depth -= fifo_size;
> + dep->fifo_depth = 0;
> + return -ENOMEM;
> + }
> +
> + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
> + dwc->num_ep_resized++;

add a blank line here

> + return 0;
> +}
> +
> static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
> {
> const struct usb_ss_ep_comp_descriptor *comp_desc;
> @@ -620,6 +731,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
> int ret;
>
> if (!(dep->flags & DWC3_EP_ENABLED)) {
> + ret = dwc3_gadget_resize_tx_fifos(dep);
> + if (ret)
> + return ret;

doesn't it look odd that you're resizing every fifo every time a new
endpoint is enabled? Is there a better way to achieve this?

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-08-10 14:29    [W:0.066 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site