lkml.org 
[lkml]   [2020]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] iio: imu: st_lsm6dsx: check st_lsm6dsx_shub_read_output return
On Sun, Aug 9, 2020 at 8:56 PM <trix@redhat.com> wrote:
>
> From: Tom Rix <trix@redhat.com>
>
> clang static analysis reports this represenative problem
>
> st_lsm6dsx_shub.c:540:8: warning: Assigned value is garbage or undefined
> *val = (s16)le16_to_cpu(*((__le16 *)data));
> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> data is set with
>
> err = st_lsm6dsx_shub_read(sensor, ch->address, data, len);
> if (err < 0)
> return err;
>
> The problem with st_lsm6dsx_shub_read() is this statement
>
> err = st_lsm6dsx_shub_read_output(hw, data,
> len & ST_LS6DSX_READ_OP_MASK);
>
> The err value is never checked.
> So check err.
>


> Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
>
> Signed-off-by: Tom Rix <trix@redhat.com>

You see, the commit message can be divided to three sections

1. Title / very short description
2. Detailed description
3. Tag block

Each of them has some specific rules:
1. One quite short line prefixed by subsystem / driver in the
specified format (usually gathered by reading git log against the
module in question)
2. Should explain why this change is done
3. Should be one tag -- one line, no blank lines in between.

Hope, you will use this in the future.

After addressing that (perhaps Jonathan will do it for you)
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index ed83471dc7dd..8c8d8870ca07 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -313,6 +313,8 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
>
> err = st_lsm6dsx_shub_read_output(hw, data,
> len & ST_LS6DSX_READ_OP_MASK);
> + if (err < 0)
> + return err;
>
> st_lsm6dsx_shub_master_enable(sensor, false);
>
> --
> 2.18.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-08-10 10:09    [W:0.038 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site