lkml.org 
[lkml]   [2020]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 1/2] gpio: add GPO driver for PCA9570
On Thu, Jul 9, 2020 at 4:48 PM Sungbo Eo <mans0n@gorani.run> wrote:
>
> NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
> Its ports are controlled only by a data byte without register address.
>

LGTM, thanks!

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
> ---
> v6:
> * removed client
> * re-added mutex
> * removed template_chip
>
> v5:
> * amended the commit message
> * removed unnecessary castings
> * added data to of_match_table
>
> v4:
> * removed ->direction_input() and ->direction_output()
> (Seems unnecessary to me)
> * removed ->set_multiple()
> (I'm not sure this implementation is really correct)
> * added ->get()
> (DS says we can read the status from the device)
> * read current status during probe
>
> v3:
> * remove mutex
> * rename buffer to out
> * simplify return statements
> * replace ->probe() to ->probe_new()
> * move ngpio to driver_data
> (PCA9571 is 8-bit so I thought making ngpio configurable is a good idea)
>
> v2:
> * move the direction functions below the set functions
> * use devm_gpiochip_add_data() and remove the remove callback
>
> v1:
> Tested in kernel 5.4 on an ipq40xx platform.
>
> This is my first time submitting a whole driver patch, and I'm not really
> familiar with this PCA expander series.
> Please let me know how I can improve this patch further.
>
> FYI there's an unmerged patch for this chip.
> http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2017-May/105602.html
> I don't have PCA9571 either so I didn't add support for it.
> ---
> drivers/gpio/Kconfig | 8 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-pca9570.c | 146 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 155 insertions(+)
> create mode 100644 drivers/gpio/gpio-pca9570.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c6b5c65c8405..d10dcb81b841 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -962,6 +962,14 @@ config GPIO_PCA953X_IRQ
> Say yes here to enable the pca953x to be used as an interrupt
> controller. It requires the driver to be built in the kernel.
>
> +config GPIO_PCA9570
> + tristate "PCA9570 4-Bit I2C GPO expander"
> + help
> + Say yes here to enable the GPO driver for the NXP PCA9570 chip.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-pca9570.
> +
> config GPIO_PCF857X
> tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
> select GPIOLIB_IRQCHIP
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 1e4894e0bf0f..33cb40c28a61 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -110,6 +110,7 @@ obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
> obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
> obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
> obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
> +obj-$(CONFIG_GPIO_PCA9570) += gpio-pca9570.o
> obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
> obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
> obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
> diff --git a/drivers/gpio/gpio-pca9570.c b/drivers/gpio/gpio-pca9570.c
> new file mode 100644
> index 000000000000..cb2b2f735c15
> --- /dev/null
> +++ b/drivers/gpio/gpio-pca9570.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Driver for PCA9570 I2C GPO expander
> + *
> + * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
> + *
> + * Based on gpio-tpic2810.c
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + * Andrew F. Davis <afd@ti.com>
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/property.h>
> +
> +/**
> + * struct pca9570 - GPIO driver data
> + * @chip: GPIO controller chip
> + * @lock: Protects write sequences
> + * @out: Buffer for device register
> + */
> +struct pca9570 {
> + struct gpio_chip chip;
> + struct mutex lock;
> + u8 out;
> +};
> +
> +static int pca9570_read(struct pca9570 *gpio, u8 *value)
> +{
> + struct i2c_client *client = to_i2c_client(gpio->chip.parent);
> + int ret;
> +
> + ret = i2c_smbus_read_byte(client);
> + if (ret < 0)
> + return ret;
> +
> + *value = ret;
> + return 0;
> +}
> +
> +static int pca9570_write(struct pca9570 *gpio, u8 value)
> +{
> + struct i2c_client *client = to_i2c_client(gpio->chip.parent);
> +
> + return i2c_smbus_write_byte(client, value);
> +}
> +
> +static int pca9570_get_direction(struct gpio_chip *chip,
> + unsigned offset)
> +{
> + /* This device always output */
> + return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int pca9570_get(struct gpio_chip *chip, unsigned offset)
> +{
> + struct pca9570 *gpio = gpiochip_get_data(chip);
> + u8 buffer;
> + int ret;
> +
> + ret = pca9570_read(gpio, &buffer);
> + if (ret)
> + return ret;
> +
> + return !!(buffer & BIT(offset));
> +}
> +
> +static void pca9570_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> + struct pca9570 *gpio = gpiochip_get_data(chip);
> + u8 buffer;
> + int ret;
> +
> + mutex_lock(&gpio->lock);
> +
> + buffer = gpio->out;
> + if (value)
> + buffer |= BIT(offset);
> + else
> + buffer &= ~BIT(offset);
> +
> + ret = pca9570_write(gpio, buffer);
> + if (ret)
> + goto out;
> +
> + gpio->out = buffer;
> +
> +out:
> + mutex_unlock(&gpio->lock);
> +}
> +
> +static int pca9570_probe(struct i2c_client *client)
> +{
> + struct pca9570 *gpio;
> +
> + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
> + if (!gpio)
> + return -ENOMEM;
> +
> + gpio->chip.label = client->name;
> + gpio->chip.parent = &client->dev;
> + gpio->chip.owner = THIS_MODULE;
> + gpio->chip.get_direction = pca9570_get_direction;
> + gpio->chip.get = pca9570_get;
> + gpio->chip.set = pca9570_set;
> + gpio->chip.base = -1;
> + gpio->chip.ngpio = (uintptr_t)device_get_match_data(&client->dev);
> + gpio->chip.can_sleep = true;
> +
> + mutex_init(&gpio->lock);
> +
> + /* Read the current output level */
> + pca9570_read(gpio, &gpio->out);
> +
> + i2c_set_clientdata(client, gpio);
> +
> + return devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
> +}
> +
> +static const struct i2c_device_id pca9570_id_table[] = {
> + { "pca9570", 4 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, pca9570_id_table);
> +
> +static const struct of_device_id pca9570_of_match_table[] = {
> + { .compatible = "nxp,pca9570", .data = (void *)4 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, pca9570_of_match_table);
> +
> +static struct i2c_driver pca9570_driver = {
> + .driver = {
> + .name = "pca9570",
> + .of_match_table = pca9570_of_match_table,
> + },
> + .probe_new = pca9570_probe,
> + .id_table = pca9570_id_table,
> +};
> +module_i2c_driver(pca9570_driver);
> +
> +MODULE_AUTHOR("Sungbo Eo <mans0n@gorani.run>");
> +MODULE_DESCRIPTION("GPIO expander driver for PCA9570");
> +MODULE_LICENSE("GPL v2");
> --
> 2.27.0
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-07-09 17:38    [W:0.064 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site