lkml.org 
[lkml]   [2020]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
Date
Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low_precision is used to switch to low precision.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
.../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..140cf3043a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+ - chris.ruehl@gtsys.com.hk
+
+description: |
+ The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+ designed especially for battery-driven high-volume consumer electronics
+ applications.
+ For further information refere to Documentation/hwmon/shtc1.rst
+
+ This binding document describes the binding for the hardware monitor
+ portion of the driver.
+
+properties:
+ compatible:
+ enum:
+ - sensirion,shtc1
+ - sensirion,shtw1
+ - sensirion,shtc3
+
+ reg:
+ const: 0x70
+
+ sensirion,blocking-io:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, the driver hold the i2c bus until measurement is finished.
+
+ sensirion,low-precision:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, the sensor aquire data with low precision (not recommended).
+ The driver aquire data with high precision by default.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c1 {
+ clock-frequency = <400000>;
+
+ shtc3@70 {
+ compatible = "sensirion,shtc3";
+ reg = <0x70>
+ sensirion,blocking-io;
+ };
+ };
+...
--
2.20.1
\
 
 \ /
  Last update: 2020-07-10 04:17    [W:0.130 / U:2.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site