lkml.org 
[lkml]   [2020]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
On Thu, Jul 02, 2020 at 03:06:01PM +0800, EastL Lee wrote:
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6779 SoC or other similar Mediatek SoCs.
>
> Signed-off-by: EastL Lee <EastL.Lee@mediatek.com>
> ---
> .../devicetree/bindings/dma/mtk-cqdma.yaml | 113 +++++++++++++++++++++
> 1 file changed, 113 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> new file mode 100644
> index 0000000..83ed742
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Command-Queue DMA controller Device Tree Binding
> +
> +maintainers:
> + - EastL Lee <EastL.Lee@mediatek.com>
> +
> +description:
> + MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
> + is dedicated to memory-to-memory transfer through queue based
> + descriptor management.
> +
> +allOf:
> + - $ref: "dma-controller.yaml#"
> +
> +properties:
> + "#dma-cells":
> + minimum: 1
> + maximum: 255
> + description:
> + Used to provide DMA controller specific information.

No, for a specific binding like this, it should be 1 defined value.

> +
> + compatible:
> + oneOf:
> + - const: mediatek,mt6765-cqdma
> + - const: mediatek,mt6779-cqdma
> +
> + reg:
> + minItems: 1
> + maxItems: 5
> + description:
> + A base address of MediaTek Command-Queue DMA controller,
> + a channel will have a set of base address.
> +
> + interrupts:
> + minItems: 1
> + maxItems: 5
> + description:
> + A interrupt number of MediaTek Command-Queue DMA controller,
> + one interrupt number per dma-channels.
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: cqdma
> +
> + dma-channel-mask:
> + $ref: /schemas/types.yaml#definitions/uint32

Alreay has a type, don't redefine it here.

> + description:
> + For DMA capability, We will know the addressing capability of
> + MediaTek Command-Queue DMA controller through dma-channel-mask.

This sounds like the kernel's DMA masks which is not what this property
is.

> + items:
> + minItems: 1
> + maxItems: 63

An array of 63 elements?

I think you want:

minimum: 1
maximum: 63

Or:

enum: [ 1, 3, 7, 0xf, 0x1f, 0x3f ]

(Though if this works, then just 'dma-channels' is enough.)

> +
> + dma-channels:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + Number of DMA channels supported by MediaTek Command-Queue DMA
> + controller, support up to five.

Is it 5 or 6 channels? You're off by one somewhere.

> + items:
> + minItems: 1
> + maxItems: 5
> +
> + dma-requests:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description:
> + Number of DMA request (virtual channel) supported by MediaTek
> + Command-Queue DMA controller, support up to 32.
> + items:
> + minItems: 1
> + maxItems: 32

You are describing how many elements in an array and this is a scalar.

> +
> +required:
> + - "#dma-cells"
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - dma-channel-mask
> + - dma-channels
> + - dma-requests
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/mt6779-clk.h>
> + cqdma: dma-controller@10212000 {
> + compatible = "mediatek,mt6779-cqdma";
> + reg = <0x10212000 0x80>,
> + <0x10212080 0x80>,
> + <0x10212100 0x80>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
> + clock-names = "cqdma";
> + dma-channel-mask = <63>;
> + dma-channels = <3>;
> + dma-requests = <32>;
> + #dma-cells = <1>;
> + };
> +
> +...
> --
> 1.9.1

\
 
 \ /
  Last update: 2020-07-09 22:59    [W:0.224 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site