lkml.org 
[lkml]   [2020]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
Date
The rk3328 uart2 port is used as boot console and to debug.
During the boot pclk_uart2 is disabled by a clk_disable_unused
initcall. Fix the uart2 function by marking pclk_uart2
as critical on rk3328. Also add sclk_uart2 as that is needed
for the same DT node.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
drivers/clk/rockchip/clk-rk3328.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
index c186a1985..cb7749cb7 100644
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
"aclk_gmac_niu",
"pclk_gmac_niu",
"pclk_phy_niu",
+ "pclk_uart2",
+ "sclk_uart2",
};

static void __init rk3328_clk_init(struct device_node *np)
--
2.11.0
\
 
 \ /
  Last update: 2020-07-08 16:46    [W:0.093 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site