lkml.org 
[lkml]   [2020]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 10/12] media: rkvdec: Lock capture pixel format in s_ctrl and s_fmt
From
Date
On 2020-07-08 05:16, Ezequiel Garcia wrote:
> Hi Jonas,
>
> Nice work!
>
> On Mon, 2020-07-06 at 21:54 +0000, Jonas Karlman wrote:
>> Add an optional valid_fmt operation that should return the valid
>> pixelformat of CAPTURE buffers.
>>
>> This is used in next patch to ensure correct pixelformat is used for 10-bit
>> and 4:2:2 content.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> ---
>> Changes in v2:
>> - Reworked validation of pixelformat
>>
>> Limitations:
>> - Only a single valid format is supported, technically both CbCr and CrCb
>> format variants could be supported by HW.
>>
>> Example call order using ffmpeg for a 10-bit H.264 608x480 video:
>>
>> 0) Open /dev/video node
>> rkvdec_reset_decoded_fmt: current valid_fmt= new valid_fmt=
>
> Controls and formats always have some defined value.
> So the concept of "valid format" is always what's
> currently valid, and is what TRY_FMT accepts.
>
> The applications get the currently set format with G_FMT.
> As per the specification, there is always a format
> set, which is why have to do all that annoying format
> reset dance.
>
> For instance, if the initial v4l2_ctrl_h264_sps.bit_depth_luma_minus8
> is 0x0 and .chroma_format_idc is 0x1 [1] as well then our initial
> valid format would be NV12.
>
> See below.
>
> [1] v4l2_ctrl_h264_sps is all 0x0 by default, but
> that's something to address on std_init_compound.
>
>> rkvdec_fill_decoded_pixfmt: pixelformat=NV12 width=64 height=48
>> rkvdec_s_ctrl: current valid_fmt= new valid_fmt=NV12
>> rkvdec_fill_decoded_pixfmt: pixelformat=NV12 width=64 height=48
>>
>> 1) Set the coded format on the OUTPUT queue via VIDIOC_S_FMT()
>> rkvdec_enum_output_fmt: index=0 pixelformat=S264
>> rkvdec_s_output_fmt: pixelformat=S264 width=608 height=480 valid_fmt=NV12
>> rkvdec_reset_decoded_fmt: current valid_fmt=NV12 new valid_fmt=
>> rkvdec_fill_decoded_pixfmt: pixelformat=NV12 width=640 height=480
>>
>> 2) Call VIDIOC_S_EXT_CTRLS() to set all the controls
>> rkvdec_try_ctrl: current valid_fmt=
>> rkvdec_s_ctrl: current valid_fmt= new valid_fmt=NV15
>> rkvdec_fill_decoded_pixfmt: pixelformat=NV15 width=640 height=480
>>
>> 3) Call VIDIOC_G_FMT() for CAPTURE queue
>> rkvdec_g_capture_fmt: pixelformat=NV15 width=640 height=480
>>
>> 4) Enumerate CAPTURE formats via VIDIOC_ENUM_FMT() on the CAPTURE queue
>> rkvdec_enum_capture_fmt: index=0 pixelformat=NV15 valid_fmt=NV15
>>
>> 5) Choose a different CAPTURE format than suggested via VIDIOC_G_FMT()
>> rkvdec_s_capture_fmt: pixelformat=NV15 width=608 height=480 valid_fmt=NV15
>> rkvdec_fill_decoded_pixfmt: pixelformat=NV15 width=640 height=480
>> rkvdec_g_capture_fmt: pixelformat=NV15 width=640 height=480
>> ---
>> drivers/staging/media/rkvdec/rkvdec.c | 59 ++++++++++++++++++++++++---
>> drivers/staging/media/rkvdec/rkvdec.h | 2 +
>> 2 files changed, 55 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
>> index 911132be6d50..11a88cb6407d 100644
>> --- a/drivers/staging/media/rkvdec/rkvdec.c
>> +++ b/drivers/staging/media/rkvdec/rkvdec.c
>> @@ -38,6 +38,16 @@ static void rkvdec_fill_decoded_pixfmt(struct rkvdec_ctx *ctx,
>> pix_mp->field = V4L2_FIELD_NONE;
>> }
>>
>> +static u32 rkvdec_valid_fmt(struct rkvdec_ctx *ctx, struct v4l2_ctrl *ctrl)
>> +{
>> + const struct rkvdec_coded_fmt_desc *coded_desc = ctx->coded_fmt_desc;
>> +
>> + if (coded_desc->ops->valid_fmt)
>> + return coded_desc->ops->valid_fmt(ctx, ctrl);
>> +
>> + return ctx->valid_fmt;
>> +}
>> +
>> static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
>> {
>> struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
>> @@ -60,6 +70,10 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
>> /* Only 8-bit is supported */
>> return -EINVAL;
>>
>> + if (ctx->valid_fmt && ctx->valid_fmt != rkvdec_valid_fmt(ctx, ctrl))
>> + /* Only current valid format */
>> + return -EINVAL;
>> +
>
> I think the user should be able to set the SPS to anything supported
> and syntax-legal, and that would effectively reset the valid format.

I agree.

>
> Maybe it also means these drivers can't accept a new SPS if there
> are buffers allocated (vb2_is_busy) ?

I think we need to be able to change SPS as long as the SPS change don't
require changing CAPTURE pixel format. Checking vb2_is_busy for when to
reject pixel format change sounds reasonable, else we probably would have
to trigger a V4L2_EVENT_SOURCE_CHANGE event or similar that a pixel format
change/negotiation is needed, however that feels out of scope for this series.

>
>> width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
>> height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
>>
>> @@ -70,8 +84,27 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
>> return 0;
>> }
>>
>> +static int rkvdec_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
>> +
>> + if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_SPS && !ctx->valid_fmt) {
>
> Here's a non-tested idea.
>
> If the SPS is supported [2], then we just set it and store it
> (store the entire SPS) and negotiate a new format.
>
> The application can the use TRY/S_FMT to negotiate
> a format, and so SPS can be used to validate that.
>
> This way, you don't need to store valid_fmt
> and you remove the single format limitation.
>
> Does that make sense?

I think it does :-)

I will update the try_ctrl/s_ctrl code to make use of vb2_is_busy instead of
valid_fmt and change the valid_fmt operation to report if a format is supported
or not. Hopefully that should remove the single format limitation.

Regards,
Jonas

>
> Thanks,
> Ezequiel
>
> [2] and possibly provided
> !vb2_is_busy(v4l2_m2m_get_vq(ctx->fh.m2m_ctx, CAPTURE))
>
>> + ctx->valid_fmt = rkvdec_valid_fmt(ctx, ctrl);
>> + if (ctx->valid_fmt) {
>> + struct v4l2_pix_format_mplane *pix_mp;
>> +
>> + pix_mp = &ctx->decoded_fmt.fmt.pix_mp;
>> + pix_mp->pixelformat = ctx->valid_fmt;
>> + rkvdec_fill_decoded_pixfmt(ctx, pix_mp);
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static const struct v4l2_ctrl_ops rkvdec_ctrl_ops = {
>> .try_ctrl = rkvdec_try_ctrl,
>> + .s_ctrl = rkvdec_s_ctrl,
>> };
>>
>> static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
>> @@ -188,6 +221,7 @@ static void rkvdec_reset_decoded_fmt(struct rkvdec_ctx *ctx)
>> {
>> struct v4l2_format *f = &ctx->decoded_fmt;
>>
>> + ctx->valid_fmt = 0;
>> rkvdec_reset_fmt(ctx, f, ctx->coded_fmt_desc->decoded_fmts[0]);
>> f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
>> f->fmt.pix_mp.width = ctx->coded_fmt.fmt.pix_mp.width;
>> @@ -243,13 +277,17 @@ static int rkvdec_try_capture_fmt(struct file *file, void *priv,
>> if (WARN_ON(!coded_desc))
>> return -EINVAL;
>>
>> - for (i = 0; i < coded_desc->num_decoded_fmts; i++) {
>> - if (coded_desc->decoded_fmts[i] == pix_mp->pixelformat)
>> - break;
>> - }
>> + if (ctx->valid_fmt) {
>> + pix_mp->pixelformat = ctx->valid_fmt;
>> + } else {
>> + for (i = 0; i < coded_desc->num_decoded_fmts; i++) {
>> + if (coded_desc->decoded_fmts[i] == pix_mp->pixelformat)
>> + break;
>> + }
>>
>> - if (i == coded_desc->num_decoded_fmts)
>> - pix_mp->pixelformat = coded_desc->decoded_fmts[0];
>> + if (i == coded_desc->num_decoded_fmts)
>> + pix_mp->pixelformat = coded_desc->decoded_fmts[0];
>> + }
>>
>> /* Always apply the frmsize constraint of the coded end. */
>> pix_mp->width = max(pix_mp->width, ctx->coded_fmt.fmt.pix_mp.width);
>> @@ -324,6 +362,7 @@ static int rkvdec_s_capture_fmt(struct file *file, void *priv,
>> return ret;
>>
>> ctx->decoded_fmt = *f;
>> + ctx->valid_fmt = f->fmt.pix_mp.pixelformat;
>> return 0;
>> }
>>
>> @@ -413,6 +452,14 @@ static int rkvdec_enum_capture_fmt(struct file *file, void *priv,
>> if (WARN_ON(!ctx->coded_fmt_desc))
>> return -EINVAL;
>>
>> + if (ctx->valid_fmt) {
>> + if (f->index)
>> + return -EINVAL;
>> +
>> + f->pixelformat = ctx->valid_fmt;
>> + return 0;
>> + }
>> +
>> if (f->index >= ctx->coded_fmt_desc->num_decoded_fmts)
>> return -EINVAL;
>>
>> diff --git a/drivers/staging/media/rkvdec/rkvdec.h b/drivers/staging/media/rkvdec/rkvdec.h
>> index 2fc9f46b6910..50e67401fdbe 100644
>> --- a/drivers/staging/media/rkvdec/rkvdec.h
>> +++ b/drivers/staging/media/rkvdec/rkvdec.h
>> @@ -64,6 +64,7 @@ vb2_to_rkvdec_decoded_buf(struct vb2_buffer *buf)
>> struct rkvdec_coded_fmt_ops {
>> int (*adjust_fmt)(struct rkvdec_ctx *ctx,
>> struct v4l2_format *f);
>> + u32 (*valid_fmt)(struct rkvdec_ctx *ctx, struct v4l2_ctrl *ctrl);
>> int (*start)(struct rkvdec_ctx *ctx);
>> void (*stop)(struct rkvdec_ctx *ctx);
>> int (*run)(struct rkvdec_ctx *ctx);
>> @@ -97,6 +98,7 @@ struct rkvdec_ctx {
>> struct v4l2_fh fh;
>> struct v4l2_format coded_fmt;
>> struct v4l2_format decoded_fmt;
>> + u32 valid_fmt;
>> const struct rkvdec_coded_fmt_desc *coded_fmt_desc;
>> struct v4l2_ctrl_handler ctrl_hdl;
>> struct rkvdec_dev *dev;
>
>

\
 
 \ /
  Last update: 2020-07-08 14:43    [W:0.090 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site