lkml.org 
[lkml]   [2020]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
Date
From: Andrew Lunn <andrew@lunn.ch>

The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Chris Healy <cphealy@gmail.com>
---
v2:
- convert spaces back to tabs
- Correct from line to show Andrew as the original author

arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff1>;
};
@@ -194,7 +194,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_3";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
@@ -202,7 +202,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_4";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff3>;
};
@@ -210,7 +210,7 @@
port@5 {
reg = <5>;
label = "eth_fc_1000_5";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff4>;
};
@@ -218,7 +218,7 @@
port@6 {
reg = <6>;
label = "eth_fc_1000_6";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff5>;
};
@@ -226,7 +226,7 @@
port@7 {
reg = <7>;
label = "eth_fc_1000_7";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff6>;
};
@@ -234,7 +234,7 @@
port@9 {
reg = <9>;
label = "eth_fc_1000_1";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff0>;
};
@@ -269,7 +269,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_8";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff7>;
};
@@ -277,7 +277,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_9";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff8>;
};
@@ -285,7 +285,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_10";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff9>;
};
--
2.21.3
\
 
 \ /
  Last update: 2020-07-09 02:13    [W:0.032 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site