lkml.org 
[lkml]   [2020]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] usb: dwc3: Host wake up support from system suspend
Date
Avoiding phy powerdown in host mode so that it can be wake up by devices.
Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active
when wakeup capable devices are connected to the host.
Using PDC interrupts instead of GIC interrupst to support wakeup in
xo shutdown case.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.



Sandeep Maheswaram (3):
usb: dwc3: core: Host wake up support from system suspend
usb: dwc3: qcom: Configure wakeup interrupts and set genpd active
wakeup flag
arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC
interrupts

arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++--
drivers/usb/dwc3/core.c | 47 +++++++++++++++++++----
drivers/usb/dwc3/core.h | 2 +
drivers/usb/dwc3/dwc3-qcom.c | 73 ++++++++++++++++++++++++++++--------
4 files changed, 103 insertions(+), 27 deletions(-)

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2020-07-08 21:18    [W:0.078 / U:1.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site