lkml.org 
[lkml]   [2020]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: sfp: Unique GPIO interrupt names
On Mon, Jul 06, 2020 at 12:38:37PM -0700, Chris Healy wrote:
> Dynamically generate a unique GPIO interrupt name, based on the
> device name and the GPIO name. For example:
>
> 103: 0 sx1503q 12 Edge sff2-los
> 104: 0 sx1503q 13 Edge sff3-los
>
> The sffX indicates the SFP the loss of signal GPIO is associated with.
>
> Signed-off-by: Chris Healy <cphealy@gmail.com>

This doesn't work in all cases.

> ---
> drivers/net/phy/sfp.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
> index 73c2969f11a4..9b03c7229320 100644
> --- a/drivers/net/phy/sfp.c
> +++ b/drivers/net/phy/sfp.c
> @@ -220,6 +220,7 @@ struct sfp {
> struct phy_device *mod_phy;
> const struct sff_data *type;
> u32 max_power_mW;
> + char sfp_irq_name[32];
>
> unsigned int (*get_state)(struct sfp *);
> void (*set_state)(struct sfp *, unsigned int);
> @@ -2349,12 +2350,15 @@ static int sfp_probe(struct platform_device *pdev)
> continue;
> }
>
> + snprintf(sfp->sfp_irq_name, sizeof(sfp->sfp_irq_name),
> + "%s-%s", dev_name(sfp->dev), gpio_of_names[i]);

sfp_irq_name will be overwritten for each GPIO IRQ claimed, which means
all IRQs for a particular cage will end up with the same name.
sfp_irq_name[] therefore needs to be an array of names, one per input.

Thanks.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

\
 
 \ /
  Last update: 2020-07-06 22:42    [W:0.045 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site