lkml.org 
[lkml]   [2020]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
Hi Guenter,

On Sat, Jul 04, 2020 at 07:26:07AM -0700, Guenter Roeck wrote:
> The EC reports a variety of error codes. Most of those, with the exception
> of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual
> error code gets lost. Convert all EC errors to Linux error codes to report
> a more meaningful error to the caller to aid debugging.
>
> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
> Cc: Prashant Malani <pmalani@chromium.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/platform/chrome/cros_ec_proto.c | 37 +++++++++++++++++++------
> 1 file changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3e745e0fe092..10aa9e483d35 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -543,6 +543,29 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> }
> EXPORT_SYMBOL(cros_ec_cmd_xfer);
>
> +static const int cros_ec_error_map[] = {
> + [EC_RES_INVALID_COMMAND] = -EOPNOTSUPP,
> + [EC_RES_ERROR] = -EIO,
> + [EC_RES_INVALID_PARAM] = -EINVAL,
> + [EC_RES_ACCESS_DENIED] = -EACCES,
> + [EC_RES_INVALID_RESPONSE] = -EPROTO,
> + [EC_RES_INVALID_VERSION] = -ENOTSUPP,
> + [EC_RES_INVALID_CHECKSUM] = -EBADMSG,
> + [EC_RES_IN_PROGRESS] = -EINPROGRESS,
> + [EC_RES_UNAVAILABLE] = -ENODATA,
> + [EC_RES_TIMEOUT] = -ETIMEDOUT,
> + [EC_RES_OVERFLOW] = -EOVERFLOW,
> + [EC_RES_INVALID_HEADER] = -EBADR,
> + [EC_RES_REQUEST_TRUNCATED] = -EBADR,
> + [EC_RES_RESPONSE_TOO_BIG] = -EFBIG,
> + [EC_RES_BUS_ERROR] = -EFAULT,
> + [EC_RES_BUSY] = -EBUSY,
> + [EC_RES_INVALID_HEADER_VERSION] = -EBADMSG,
> + [EC_RES_INVALID_HEADER_CRC] = -EBADMSG,
> + [EC_RES_INVALID_DATA_CRC] = -EBADMSG,
> + [EC_RES_DUP_UNAVAILABLE] = -ENODATA,
> +};
> +
> /**
> * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> * @ec_dev: EC device.
> @@ -555,8 +578,7 @@ EXPORT_SYMBOL(cros_ec_cmd_xfer);
> *
> * Return:
> * >=0 - The number of bytes transferred
> - * -ENOTSUPP - Operation not supported
> - * -EPROTO - Protocol error
> + * <0 - Linux error code
> */
> int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> struct cros_ec_command *msg)
> @@ -566,13 +588,12 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> ret = cros_ec_cmd_xfer(ec_dev, msg);
> if (ret < 0) {
> dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
> - } else if (msg->result == EC_RES_INVALID_VERSION) {
> - dev_dbg(ec_dev->dev, "Command invalid version (err:%d)\n",
> - msg->result);
> - return -ENOTSUPP;
> } else if (msg->result != EC_RES_SUCCESS) {
> - dev_dbg(ec_dev->dev, "Command result (err: %d)\n", msg->result);
> - return -EPROTO;
> + if (msg->result < ARRAY_SIZE(cros_ec_error_map) && cros_ec_error_map[msg->result])

Do we expect a case where cros_ec_error_map[msg->result] == 0?

> + ret = cros_ec_error_map[msg->result];
> + else
> + ret = -EPROTO;
> + dev_dbg(ec_dev->dev, "Command result (err: %d [%d])\n", msg->result, ret);
> }
>
> return ret;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-07-06 20:53    [W:0.139 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site