lkml.org 
[lkml]   [2020]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] arm64: allwinner: a64: enable Bluetooth On Pinebook
Hi,

On Sun, Jul 05, 2020 at 12:51:10PM -0700, Vasily Khoruzhick wrote:
> Pinebook has an RTL8723CS WiFi + BT chip, BT is connected to UART1
> and uses PL5 as device wake GPIO, PL6 as host wake GPIO the I2C
> controlling signals are connected to R_I2C bus.
>
> Enable it in the device tree.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
> .../arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> index 64b1c54f87c0..e63ff271be4e 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> @@ -408,6 +408,18 @@ &uart0 {
> status = "okay";
> };
>
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> + status = "okay";

You probably need uart-has-rtscts here

> +
> + bluetooth {
> + compatible = "realtek,rtl8723cs-bt";
> + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
> + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
> + };

And max-speed I guess?

Maxime
>

\
 
 \ /
  Last update: 2020-07-06 13:49    [W:0.232 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site