lkml.org 
[lkml]   [2020]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] rkvdec: h264: Refuse to decode unsupported bitstream
From
Date
On 2020-06-26 19:11, Ezequiel Garcia wrote:
> The hardware only supports 4:2:2, 4:2:0 or 4:0:0 (monochrome),
> 8-bit or 10-bit depth content.
>
> Verify that the PPS refers to a supported bitstream, and refuse

This should be SPS not PPS, same for hantro patch.

> unsupported bitstreams by failing at TRY_EXT_CTRLS time.
>
> The driver is currently broken on 10-bit and 4:2:2
> so disallow those as well.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> ---
> drivers/staging/media/rkvdec/rkvdec.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
> index 225eeca73356..0f81b47792f6 100644
> --- a/drivers/staging/media/rkvdec/rkvdec.c
> +++ b/drivers/staging/media/rkvdec/rkvdec.c
> @@ -27,6 +27,32 @@
> #include "rkvdec.h"
> #include "rkvdec-regs.h"
>
> +static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_SPS) {
> + const struct v4l2_ctrl_h264_sps *sps = ctrl->p_cur.p;

This should be p_new and not p_cur to validate the new ctrl value, same for hantro patch.

With both fixed this and the hantro patch is,

Reviewed-by: Jonas Karlman <jonas@kwiboo.se>

Regards,
Jonas

> + /*
> + * TODO: The hardware supports 10-bit and 4:2:2 profiles,
> + * but it's currently broken in the driver.
> + * Reject them for now, until it's fixed.
> + */
> + if (sps->chroma_format_idc > 1)
> + /* Only 4:0:0 and 4:2:0 are supported */
> + return -EINVAL;
> + if (sps->bit_depth_luma_minus8 != sps->bit_depth_chroma_minus8)
> + /* Luma and chroma bit depth mismatch */
> + return -EINVAL;
> + if (sps->bit_depth_luma_minus8 != 0)
> + /* Only 8-bit is supported */
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops rkvdec_ctrl_ops = {
> + .try_ctrl = rkvdec_try_ctrl,
> +};
> +
> static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
> {
> .per_request = true,
> @@ -42,6 +68,7 @@ static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
> .per_request = true,
> .mandatory = true,
> .cfg.id = V4L2_CID_MPEG_VIDEO_H264_SPS,
> + .cfg.ops = &rkvdec_ctrl_ops,
> },
> {
> .per_request = true,
>

\
 
 \ /
  Last update: 2020-07-06 11:47    [W:0.719 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site