lkml.org 
[lkml]   [2020]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH] arm: DT: vf610-zii-scu4-aib.dts: Configure fibre ports to 1000BaseX
    The SFF soldered onto the board expect the ports to use 1000BaseX.  It
    makes no sense to have the ports set to SGMII, since they don't even
    support that mode.

    Signed-off-by: Andrew Lunn <andrew@lunn.ch>
    Signed-off-by: Chris Healy <cphealy@gmail.com>
    ---
    arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
    1 file changed, 10 insertions(+), 10 deletions(-)

    diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
    b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
    index b642520199ba..040a1f8b6130 100644
    --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
    +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
    @@ -186,7 +186,7 @@
    port@2 {
    reg = <2>;
    label = "eth_fc_1000_2";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff1>;
    };
    @@ -194,7 +194,7 @@
    port@3 {
    reg = <3>;
    label = "eth_fc_1000_3";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff2>;
    };
    @@ -202,7 +202,7 @@
    port@4 {
    reg = <4>;
    label = "eth_fc_1000_4";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff3>;
    };
    @@ -210,7 +210,7 @@
    port@5 {
    reg = <5>;
    label = "eth_fc_1000_5";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff4>;
    };
    @@ -218,7 +218,7 @@
    port@6 {
    reg = <6>;
    label = "eth_fc_1000_6";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff5>;
    };
    @@ -226,7 +226,7 @@
    port@7 {
    reg = <7>;
    label = "eth_fc_1000_7";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff6>;
    };
    @@ -234,7 +234,7 @@
    port@9 {
    reg = <9>;
    label = "eth_fc_1000_1";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff0>;
    };
    @@ -269,7 +269,7 @@
    port@2 {
    reg = <2>;
    label = "eth_fc_1000_8";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff7>;
    };
    @@ -277,7 +277,7 @@
    port@3 {
    reg = <3>;
    label = "eth_fc_1000_9";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff8>;
    };
    @@ -285,7 +285,7 @@
    port@4 {
    reg = <4>;
    label = "eth_fc_1000_10";
    - phy-mode = "sgmii";
    + phy-mode = "1000base-x";
    managed = "in-band-status";
    sfp = <&sff9>;
    };
    --
    2.21.3
    \
     
     \ /
      Last update: 2020-07-06 03:03    [W:2.989 / U:1.548 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site