lkml.org 
[lkml]   [2020]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: exynos: Add minimal bootargs
On Sun, Jul 05, 2020 at 07:09:14AM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
> > Also, why did you use different serial for console?
> >
> Once UART driver gets probed then console changes to ttySAC0. In case I am using stdout-path only,
> after bootconsole is disabled, kernel logs re-start printing from beginning (which might be expected behaviour?)
>
> [ 0.012416] printk: console [tty0] enabled
> [ 0.016491] printk: bootconsole [exynos4210] disabled
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd032]
> [ 0.000000] Linux version 5.8.0-rc3-next-20200703-00008-g4af626444f4a-dirty (alim@alim) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [l0
> [ 0.000000] Machine model: Samsung Exynos7 Espresso board based on Exynos7
>

No, this is not desired. The fix for it should not be redefining the
console to wrong argument.

For example on Odroid MC1 this problem does not exist:

[ 0.000000] earlycon: exynos4210 at MMIO 0x12c20000 (options '115200n8')
[ 0.000000] printk: bootconsole [exynos4210] enabled
[ 3.111883] printk: console [ttySAC2] enabled
[ 3.111883] printk: console [ttySAC2] enabled
[ 3.120102] printk: bootconsole [exynos4210] disabled
[ 3.120102] printk: bootconsole [exynos4210] disabled


but your console for some reason is tty0... why? Is your console
ttySAC2? Maybe it is the effect of alias:
serial0 = &serial_2;

> > However the question is, are you sure you want earlycon on every, including
> > successful boot? On most of the boards we do not enable by default. If
> > developer needs, he can choose it for example via U-Boot "setenv opts
> > earlycon".
> >
> Using U-Boot is not the case always, any bootload can be used to boot the Linux, currently I am Coreboot.
> And 'earlycon' is not setup by default.
> As Espresson board is development board, IMO it is ok to keep it enable all the time, this helps in quickly knowing what going on incase boot fails early.
> Let me know if it is ok to keep " console=ttySAC0,115200n8" or shell I just re-spin with only 'earlycon'? or any other suggestion?

It should be just earlycon.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-07-05 20:10    [W:0.147 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site