lkml.org 
[lkml]   [2020]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5.4 00/19] 5.4.55-rc1 review
On Fri, Jul 31, 2020 at 12:32 PM Naresh Kamboju
<naresh.kamboju@linaro.org> wrote:
>
> On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.55 release.
> > There are 19 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> Regressions on arm64 Juno-r2 device running LTP controllers-tests
>
> CONFIG_ARM64_64K_PAGES=y
>
> Unable to handle kernel paging request at virtual address dead000000000108

This is LIST_POISON1+8, so something was following a list_head that got
deleted from a list.

> [dead000000000108] address between user and kernel address ranges
> Internal error: Oops: 96000044 [#1] PREEMPT SMP
>
> pc : get_page_from_freelist+0xa64/0x1030
> lr : get_page_from_freelist+0x9c4/0x1030
>
> We are trying to reproduce this kernel panic and trying to narrow down to
> specific test cases.
>
> Summary
> ------------------------------------------------------------------------
>
> kernel: 5.4.55-rc1
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> git branch: linux-5.4.y
> git commit: 6666ca784e9e47288180a15935061d88debc9e4b
> git describe: v5.4.54-20-g6666ca784e9e
> Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.54-20-g6666ca784e9e
>
> arm64 kernel config and details:
> config: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/kernel.config
> vmlinux: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/vmlinux.xz
> System.map: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/System.map
>
> steps to reproduce:
> - boot juno-r2 with 64k page size config
> - run ltp controllers
> # cd /opt/ltp
> # ./runltp -f controllers
>
> memcg_process: shmget() failed: Invalid argument
> [ 248.372285] Unable to handle kernel paging request at virtual
> address dead000000000108
> [ 248.380223] Mem abort info:
> [ 248.383015] ESR = 0x96000044
> [ 248.386071] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 248.391387] SET = 0, FnV = 0
> [ 248.394440] EA = 0, S1PTW = 0
> [ 248.397580] Data abort info:
> [ 248.400460] ISV = 0, ISS = 0x00000044
> [ 248.404296] CM = 0, WnR = 1
> [ 248.407264] [dead000000000108] address between user and kernel address ranges
> [ 248.414410] Internal error: Oops: 96000044 [#1] PREEMPT SMP
> [ 248.419989] Modules linked in: tda998x drm_kms_helper drm crct10dif_ce fuse
> [ 248.426975] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.55-rc1 #1
> [ 248.433249] Hardware name: ARM Juno development board (r2) (DT)
> [ 248.439178] pstate: a0000085 (NzCv daIf -PAN -UAO)
> [ 248.443984] pc : get_page_from_freelist+0xa64/0x1030
> [ 248.448955] lr : get_page_from_freelist+0x9c4/0x1030

The function is a little too long for me to see immediately which list this is.
Using addr2line should help.

> [ 248.453923] sp : ffff80001000fbb0
> [ 248.457238] x29: ffff80001000fbb0 x28: ffff00097fdbfe48
> [ 248.462557] x27: 0000000000000010 x26: 0000000000000000
> [ 248.467877] x25: ffff00097feabdc0 x24: 0000000000000000
> [ 248.473196] x23: 0000000000000000 x22: 0000000000000000
> [ 248.478515] x21: 0000fff680154180 x20: ffff00097fdbfe38
> [ 248.483835] x19: 0000000000000000 x18: 0000000000000000
> [ 248.489154] x17: 0000000000000000 x16: 0000000000000000
> [ 248.494473] x15: 0000000000000000 x14: 0000000000000000
> [ 248.499792] x13: 0000000000000000 x12: 0000000034d4d91d
> [ 248.505111] x11: 0000000000000000 x10: 0000000000000000
> [ 248.510430] x9 : ffff80096e790000 x8 : ffffffffffffff40
> [ 248.515749] x7 : 0000000000000000 x6 : ffffffe002308b48
> [ 248.521068] x5 : ffff00097fdbfe38 x4 : dead000000000100
> [ 248.526387] x3 : 0000000000000000 x2 : 0000000000000000
> [ 248.531706] x1 : 0000000000000000 x0 : ffffffe002308b40
> [ 248.537026] Call trace:
> [ 248.539475] get_page_from_freelist+0xa64/0x1030
> [ 248.544099] __alloc_pages_nodemask+0x144/0x280
> [ 248.548635] page_frag_alloc+0x70/0x140
> [ 248.552479] __netdev_alloc_skb+0x158/0x188
> [ 248.556667] smsc911x_poll+0x90/0x268

This looks like a regular memory allocation, one common thing that may
have gone wrong here would be an earlier double-free.

There are not a lot of commits in v5.4.55-rc1, and most of these
are surely unrelated:

6666ca784e9e (HEAD, stable-rc/linux-5.4.y) Linux 5.4.55-rc1
ee4984bf5748 Revert "dpaa_eth: fix usage as DSA master, try 3"
783efa432aa4 PM: wakeup: Show statistics for deleted wakeup sources again
967783c61b31 regmap: debugfs: check count when read regmap file
3999cdbf89f0 drivers/net/wan/x25_asy: Fix to make it work
eb8b6691d757 AX.25: Prevent integer overflows in connect and sendmsg
3c3ae3e4c529 AX.25: Prevent out-of-bounds read in ax25_sendmsg()
e9380b1e9f82 AX.25: Fix out-of-bounds read in ax25_connect()
71e00f341e74 rxrpc: Fix sendmsg() returning EPIPE due to recvmsg()
returning ENODATA
a385dfd083fb ip6_gre: fix null-ptr-deref in ip6gre_init_net()
161727c98eb6 net-sysfs: add a newline when printing 'tx_timeout' by sysfs
a93155189546 qrtr: orphan socket in qrtr_release()

I don't think any of the above are in use on your machine.

1365360e789d udp: Improve load balancing for SO_REUSEPORT.
efb2848c55b3 udp: Copy has_conns in reuseport_grow().
829a46fae4fd sctp: shrink stream outq when fails to do addstream reconf
a4842355118b sctp: shrink stream outq only when new outcnt < old outcnt
e99e79382d46 tcp: allow at most one TLP probe per flight
66007a7d7f4b net: udp: Fix wrong clean up for IS_UDPLITE macro

These seem possible but unlikely to be the culprit

8508b3ca8595 rtnetlink: Fix memory(net_device) leak when ->newlink fails
c1efeaaebc74 dev: Defer free of skbs in flush_backlog

These both deal with memory allocation in some form, I would try reverting
the last one first.

Arnd

\
 
 \ /
  Last update: 2020-07-31 13:48    [W:0.176 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site