Messages in this thread | | | Subject | Re: [RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250 | From | Dmitry Baryshkov <> | Date | Fri, 3 Jul 2020 18:03:49 +0300 |
| |
On 30/06/2020 00:17, Jonathan Marek wrote: > This series adds the missing clock drivers and dts nodes to enable > the GPU on both SM8150 and SM8250. > > Note an extra patch [1] is still required for GPU to work on SM8250. > > Changes in V2: > * Added "clk: qcom: gcc: fix sm8150 GPU and NPU clocks" to fix the newly added > SM8150 GPU gcc clocks > * Added "Fixes:" tag to "clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL" > * Added yaml schemas to gpucc dt-bindings patches > * Added "clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers" and changed > gpucc patches to use it. > * Removed CLK_IS_CRITICAL from gpu_cc_ahb_clk > * Added missing rpmh regulator level for sm8250 GPU clock levels > * Use sm8150/sm8250 iommu compatibles in dts > * Add gcc_gpu_gpll0_clk_src/gcc_gpu_gpll0_div_clk_src to gpucc clocks in dts > > [1] https://gist.github.com/flto/784f1aca761ebf2fe6c105719a4a04ca
With your patches applied:
[ 56.751977] msm msm: [drm:adreno_request_fw] loaded qcom/a650_sqe.fw from new location [ 56.760166] msm msm: [drm:adreno_request_fw] loaded qcom/a650_gmu.bin from new location [ 56.768485] arm-smmu 3da0000.iommu: genpd_runtime_resume() [ 56.774196] PM: gpu_cx_gdsc: Power-on latency exceeded, new value 49531 ns [ 56.781730] arm-smmu 3da0000.iommu: resume latency exceeded, 462604 ns [ 56.799559] platform 3d6a000.gmu: [drm:a6xx_gmu_resume] *ERROR* GMU firmware initialization timed out [ 56.809260] arm-smmu 3da0000.iommu: genpd_runtime_suspend() [ 56.813062] msm msm: [drm:adreno_load_gpu] *ERROR* Couldn't power up the GPU: -110
-- With best wishes Dmitry
| |