lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] dt-bindings: display: Document NewVision NV3052C DT node
Hi Paul,

Thank you for the patch.

On Mon, Jul 27, 2020 at 06:46:08PM +0200, Paul Cercueil wrote:
> Add documentation for the Device Tree node for LCD panels based on the
> NewVision NV3052C controller.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> .../display/panel/newvision,nv3052c.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/newvision,nv3052c.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3052c.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3052c.yaml
> new file mode 100644
> index 000000000000..751a28800fc2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3052c.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/newvision,nv3052c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NewVision NV3052C TFT LCD panel driver with SPI control bus

s/driver/driver IC/ (or driver chip, or controller, or any other similar
term) to avoid confusion with device drivers.

Do I understand that the NV3052C also supports control through DSI ?
Shouldn't this appear in the DT bindings ? Do I assume correctly that
the panel will be controlled either through SPI or through DSI, but not
through both ?

> +
> +maintainers:
> + - Paul Cercueil <paul@crapouillou.net>
> +
> +description: |
> + This is a driver for 320x240 TFT panels, accepting a variety of input
> + streams that get adapted and scaled to the panel. The panel output has
> + 960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
> + VCOMH outputs.
> +
> + The panel must obey the rules for a SPI slave device as specified in
> + spi/spi-controller.yaml
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - leadtek,ltk035c5444t-spi

According to its datasheet, that panel is 640x480 :-)

I think you need a bit of documentation to explain that two compatible
strings are needed, one matching the panel type, and a second one
matching the chip.

> +
> + - const: newvision,nv3052c
> +
> + reg:
> + maxItems: 1
> +
> + reset-gpios: true
> + port: true

The NV3052C requires multiple power supplies, I think this needs to be
taken into account here.

> +
> +required:
> + - compatible
> + - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + display@0 {
> + compatible = "leadtek,ltk035c5444t-spi", "newvision,nv3052c";
> + reg = <0>;
> +
> + spi-max-frequency = <15000000>;
> + spi-3wire;
> + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
> + backlight = <&backlight>;
> + power-supply = <&vcc>;
> +
> + port {
> + panel_input: endpoint {
> + remote-endpoint = <&panel_output>;
> + };
> + };
> + };
> + };
> +
> +...

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-07-29 19:11    [W:0.176 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site