lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] scsi: sd: add runtime pm to open / release
On Wed, Jul 29, 2020 at 04:12:22PM +0200, Martin Kepplinger wrote:
> On 28.07.20 22:02, Alan Stern wrote:
> > On Tue, Jul 28, 2020 at 09:02:44AM +0200, Martin Kepplinger wrote:
> >> Hi Alan,
> >>
> >> Any API cleanup is of course welcome. I just wanted to remind you that
> >> the underlying problem: broken block device runtime pm. Your initial
> >> proposed fix "almost" did it and mounting works but during file access,
> >> it still just looks like a runtime_resume is missing somewhere.
> >
> > Well, I have tested that proposed fix several times, and on my system
> > it's working perfectly. When I stop accessing a drive it autosuspends,
> > and when I access it again it gets resumed and works -- as you would
> > expect.
>
> that's weird. when I mount, everything looks good, "sda1". But as soon
> as I cd to the mountpoint and do "ls" (on another SD card "ls" works but
> actual file reading leads to the exact same errors), I get:
>
> [ 77.474632] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result:
> hostbyte=0x00 driverbyte=0x08 cmd_age=0s
> [ 77.474647] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x6 [current]
> [ 77.474655] sd 0:0:0:0: [sda] tag#0 ASC=0x28 ASCQ=0x0
> [ 77.474667] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 60
> 40 00 00 01 00

This error report comes from the SCSI layer, not the block layer.

> [ 77.474678] blk_update_request: I/O error, dev sda, sector 24640 op
> 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [ 77.485836] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 77.491628] blk_update_request: I/O error, dev sda, sector 24641 op
> 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [ 77.502275] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 77.508051] blk_update_request: I/O error, dev sda, sector 24642 op
> 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [ 77.518651] sd 0:0:0:0: [sda] tag#0 device offline or changed
> (...)
> [ 77.947653] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 77.953434] FAT-fs (sda1): Directory bread(block 16448) failed
> [ 77.959333] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 77.965118] FAT-fs (sda1): Directory bread(block 16449) failed
> [ 77.971014] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 77.976802] FAT-fs (sda1): Directory bread(block 16450) failed
> [ 77.982698] sd 0:0:0:0: [sda] tag#0 device offline or changed
> (...)
> [ 78.384929] FAT-fs (sda1): Filesystem has been set read-only
> [ 103.070973] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 103.076751] print_req_error: 118 callbacks suppressed
> [ 103.076760] blk_update_request: I/O error, dev sda, sector 9748 op
> 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
> [ 103.087428] Buffer I/O error on dev sda1, logical block 1556, lost
> async page write
> [ 103.095309] sd 0:0:0:0: [sda] tag#0 device offline or changed
> [ 103.101123] blk_update_request: I/O error, dev sda, sector 17162 op
> 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
> [ 103.111883] Buffer I/O error on dev sda1, logical block 8970, lost
> async page write

I can't tell why you're getting that error. In one of my tests the
device returned the same kind of error status (Sense Key = 6, ASC =
0x28) but the operation was then retried successfully. Perhaps the
problem lies in the device you are testing.

> >> As we need to have that working at some point, I might look into it, but
> >> someone who has experience in the block layer can surely do it more
> >> efficiently.
> >
> > I suspect that any problems you still face are caused by something else.
> >
>
> I then formatted sda1 to ext2 (on the runtime suspend system testing
> your patch) and that seems to have worked!
>
> Again accessing the mountpoint then yield the very same "device offline
> or changed" errors.
>
> What kind of device are you testing? You should be easily able to
> reproduce this using an "sd" device.

I tested two devices: a SanDisk Cruzer USB flash drive and a
g-mass-storage gadget running under dummy-hcd. They each showed up as
/dev/sdb on my system.

I haven't tried testing with an SD card. If you have any specific
sequence of commands you would like me to run, let me know.

> The problems must lie in the different other drivers we use I guess.

Or the devices. Have you tried testing with a USB flash drive?

Alan Stern

\
 
 \ /
  Last update: 2020-07-29 16:32    [W:0.134 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site