lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/10] arm64: dts: qcom: msm8992: Add BLSP_I2C1 support
Date
This will be required to support touchscreen on Lumia
devices.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 35 +++++++++++++++++++++++++++
1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 9b42ac42b171..c7dc81311f6a 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -304,6 +304,27 @@ blsp1_uart2: serial@f991e000 {
status = "disabled";
};

+ /*
+ * This I2C seems to only be present on WP platforms
+ * and is likely disabled in firmware
+ * (hangs at least one device) on android platforms.
+ */
+ blsp_i2c1: i2c@f9923000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9923000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
@@ -524,6 +545,20 @@ sdc1_rclk_off: rclk-off {
bias-pull-down;
};

+ i2c1_default: i2c1-default {
+ function = "blsp_i2c1";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c1_sleep: i2c1-sleep {
+ function = "gpio";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
i2c2_default: i2c2-default {
function = "blsp_i2c2";
pins = "gpio6", "gpio7";
--
2.27.0
\
 
 \ /
  Last update: 2020-07-29 14:02    [W:0.120 / U:2.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site