lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
Date
Some UFS devices require delay after VCC power rail is turned-off.
Introduce a device quirk "DELAY_AFTER_LPM" to add 5ms delays after
VCC power-off during suspend flow.

Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs_quirks.h | 7 +++++++
drivers/scsi/ufs/ufshcd.c | 11 +++++++++++
2 files changed, 18 insertions(+)

diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 2a0041493e30..07f559ac5883 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -109,4 +109,11 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)

+/*
+ * Some UFS devices require delay after VCC power rail is turned-off.
+ * Enable this quirk to introduce 5ms delays after VCC power-off during
+ * suspend flow.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM (1 << 11)
+
#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index acba2271c5d3..63f4e2f75aa1 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8111,6 +8111,8 @@ static int ufshcd_link_state_transition(struct ufs_hba *hba,

static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
{
+ bool vcc_off = false;
+
/*
* It seems some UFS devices may keep drawing more than sleep current
* (atleast for 500us) from UFS rails (especially from VCCQ rail).
@@ -8139,13 +8141,22 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
!hba->dev_info.is_lu_power_on_wp) {
ufshcd_setup_vreg(hba, false);
+ vcc_off = true;
} else if (!ufshcd_is_ufs_dev_active(hba)) {
ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+ vcc_off = true;
if (!ufshcd_is_link_active(hba)) {
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
}
}
+
+ /*
+ * Some UFS devices require delay after VCC power rail is turned-off.
+ */
+ if (vcc_off && hba->vreg_info.vcc &&
+ hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_AFTER_LPM)
+ usleep_range(5000, 5100);
}

static int ufshcd_vreg_set_hpm(struct ufs_hba *hba)
--
2.18.0
\
 
 \ /
  Last update: 2020-07-29 07:19    [W:0.087 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site