lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
Date
To stop conversion ads1015_set_power_state function use unimplemented
function pm_runtime_put_autosuspend if CONFIG_PM is not set.
If CONFIG_PM is disabled, there is no need to start/stop conversion.
Fix it by adding return 0 function variant if CONFIG_PM is not set.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
---
drivers/iio/adc/ti-ads1015.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 5ea4f45d6bad..64fe3b2a6ec6 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -316,6 +316,7 @@ static const struct iio_chan_spec ads1115_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
};

+#ifdef CONFIG_PM
static int ads1015_set_power_state(struct ads1015_data *data, bool on)
{
int ret;
@@ -333,6 +334,15 @@ static int ads1015_set_power_state(struct ads1015_data *data, bool on)
return ret < 0 ? ret : 0;
}

+#else /* !CONFIG_PM */
+
+static int ads1015_set_power_state(struct ads1015_data *data, bool on)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PM */
+
static
int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
{
--
2.27.0
\
 
 \ /
  Last update: 2020-07-29 10:01    [W:0.062 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site