lkml.org 
[lkml]   [2020]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Staging: iio: Fixed a punctuation and a spelling mistake.
Date
Added a missing comma and changed 'it it useful' to 'it is useful'.

Signed-off-by: Ankit Baluni <b18007@students.iitmandi.ac.in>
---
Changes in -v2:
-Remove space before ':' in subject line.

drivers/staging/iio/Documentation/overview.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt
index ebdc64f451d7..00409d5dab4e 100644
--- a/drivers/staging/iio/Documentation/overview.txt
+++ b/drivers/staging/iio/Documentation/overview.txt
@@ -9,7 +9,7 @@ The aim is to fill the gap between the somewhat similar hwmon and
input subsystems. Hwmon is very much directed at low sample rate
sensors used in applications such as fan speed control and temperature
measurement. Input is, as its name suggests focused on input
-devices. In some cases there is considerable overlap between these and
+devices. In some cases, there is considerable overlap between these and
IIO.

A typical device falling into this category would be connected via SPI
@@ -38,7 +38,7 @@ series and Analog Devices ADXL345 accelerometers. Each buffer supports
polling to establish when data is available.

* Trigger and software buffer support. In many data analysis
-applications it it useful to be able to capture data based on some
+applications it is useful to be able to capture data based on some
external signal (trigger). These triggers might be a data ready
signal, a gpio line connected to some external system or an on
processor periodic interrupt. A single trigger may initialize data
--
2.25.1
\
 
 \ /
  Last update: 2020-07-29 09:34    [W:0.062 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site