lkml.org 
[lkml]   [2020]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/3] arm64: dts: sc7180: Add wakeup support over UART RX
From
Date

On 7/24/2020 9:28 AM, satya priya wrote:
> Add the necessary pinctrl and interrupts to make UART
> wakeup capable.


Reviewed-by: Akash Asthana <akashast@codeaurora.org>

> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
> Changes in V2:
> - As per Matthias's comment added wakeup support for all the UARTs
> of SC7180.
>
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 98 ++++++++++++++++++++++++++++++------
> 1 file changed, 84 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 16df08d..044a4d0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -787,9 +787,11 @@
> reg = <0 0x00880000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart0_default>;
> - interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart0_sleep>;
> + interrupts-extended = <&intc GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
> @@ -839,9 +841,11 @@
> reg = <0 0x00884000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart1_default>;
> - interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart1_sleep>;
> + interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 3 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
> @@ -925,9 +929,11 @@
> reg = <0 0x0088c000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart3_default>;
> - interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart3_sleep>;
> + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
> @@ -1011,9 +1017,11 @@
> reg = <0 0x00894000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart5_default>;
> - interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart5_sleep>;
> + interrupts-extended = <&intc GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 28 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
> @@ -1078,9 +1086,11 @@
> reg = <0 0x00a80000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart6_default>;
> - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart6_sleep>;
> + interrupts-extended = <&intc GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
> @@ -1250,9 +1260,11 @@
> reg = <0 0x00a90000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart10_default>;
> - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart10_sleep>;
> + interrupts-extended = <&intc GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 89 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
> @@ -1302,9 +1314,11 @@
> reg = <0 0x00a94000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&qup_uart11_default>;
> - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-1 = <&qup_uart11_sleep>;
> + interrupts-extended = <&intc GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 56 IRQ_TYPE_EDGE_FALLING>;
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&qup_opp_table>;
> interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
> @@ -1632,6 +1646,14 @@
> };
> };
>
> + qup_uart0_sleep: qup-uart0-sleep {
> + pinmux {
> + pins = "gpio34", "gpio35",
> + "gpio36", "gpio37";
> + function = "gpio";
> + };
> + };
> +
> qup_uart1_default: qup-uart1-default {
> pinmux {
> pins = "gpio0", "gpio1",
> @@ -1640,6 +1662,14 @@
> };
> };
>
> + qup_uart1_sleep: qup-uart1-sleep {
> + pinmux {
> + pins = "gpio0", "gpio1",
> + "gpio2", "gpio3";
> + function = "gpio";
> + };
> + };
> +
> qup_uart2_default: qup-uart2-default {
> pinmux {
> pins = "gpio15", "gpio16";
> @@ -1655,6 +1685,14 @@
> };
> };
>
> + qup_uart3_sleep: qup-uart3-sleep {
> + pinmux {
> + pins = "gpio38", "gpio39",
> + "gpio40", "gpio41";
> + function = "gpio";
> + };
> + };
> +
> qup_uart4_default: qup-uart4-default {
> pinmux {
> pins = "gpio115", "gpio116";
> @@ -1670,6 +1708,14 @@
> };
> };
>
> + qup_uart5_sleep: qup-uart5-sleep {
> + pinmux {
> + pins = "gpio25", "gpio26",
> + "gpio27", "gpio28";
> + function = "gpio";
> + };
> + };
> +
> qup_uart6_default: qup-uart6-default {
> pinmux {
> pins = "gpio59", "gpio60",
> @@ -1678,6 +1724,14 @@
> };
> };
>
> + qup_uart6_sleep: qup-uart6-sleep {
> + pinmux {
> + pins = "gpio59", "gpio60",
> + "gpio61", "gpio62";
> + function = "gpio";
> + };
> + };
> +
> qup_uart7_default: qup-uart7-default {
> pinmux {
> pins = "gpio6", "gpio7";
> @@ -1707,6 +1761,14 @@
> };
> };
>
> + qup_uart10_sleep: qup-uart10-sleep {
> + pinmux {
> + pins = "gpio86", "gpio87",
> + "gpio88", "gpio89";
> + function = "gpio";
> + };
> + };
> +
> qup_uart11_default: qup-uart11-default {
> pinmux {
> pins = "gpio53", "gpio54",
> @@ -1715,6 +1777,14 @@
> };
> };
>
> + qup_uart11_sleep: qup-uart11-sleep {
> + pinmux {
> + pins = "gpio53", "gpio54",
> + "gpio55", "gpio56";
> + function = "gpio";
> + };
> + };
> +
> sdc1_on: sdc1-on {
> pinconf-clk {
> pins = "sdc1_clk";

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-07-28 07:37    [W:0.151 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site