lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [net-next v4 2/6] net: marvell: prestera: Add PCI interface support
Mon, Jul 27, 2020 at 02:22:38PM CEST, vadym.kochan@plvision.eu wrote:
>Add PCI interface driver for Prestera Switch ASICs family devices, which
>provides:
>
> - Firmware loading mechanism
> - Requests & events handling to/from the firmware
> - Access to the firmware on the bus level
>
>The firmware has to be loaded each time the device is reset. The driver
>is loading it from:
>
> /lib/firmware/marvell/prestera_fw-v{MAJOR}.{MINOR}.img
>
>The full firmware image version is located within the internal header
>and consists of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has
>hard-coded minimum supported firmware version which it can work with:
>
> MAJOR - reflects the support on ABI level between driver and loaded
> firmware, this number should be the same for driver and loaded
> firmware.
>
> MINOR - this is the minimum supported version between driver and the
> firmware.
>
> PATCH - indicates only fixes, firmware ABI is not changed.
>
>Firmware image file name contains only MAJOR and MINOR numbers to make
>driver be compatible with any PATCH version.
>
>Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
>Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
>Acked-by: Jiri Pirko <jiri@mellanox.com>

You have to remove the tag if you change the patch from last tagged
version...


>---
>PATCH v4:
> 1) Get rid of "packed" attribute for the fw image header, it is
> already aligned.
>
> 2) Cleanup not needed initialization of variables which are used in
> readl_poll_timeout() helpers.
>
> 3) Replace #define's of prestera_{fw,ldr}_{read,write} to static funcs.
>
> 4) Use pcim_ helpers for resource allocation
>
> 5) Use devm_zalloc() for struct prestera_fw instance allocation.
>
> 6) Use module_pci_driver(prestera_pci_driver) instead of module_{init,exit}.
>
> 7) Use _MS prefix for timeout #define's.
>
> 8) Use snprintf for firmware image path generation instead of using
> macrosses.
>
> 9) Use memcpy_xxxio helpers for IO memory copying.
>
> 10) By default use same build type ('m' or 'y') for
> CONFIG_PRESTERA_PCI which is used by CONFIG_PRESTERA.
>

[...]

\
 
 \ /
  Last update: 2020-07-27 14:32    [W:0.180 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site