lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/7] dt-bindings: interconnect: single yaml file for RPMh interconnect drivers
Date
These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 interconnect bindings.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
.../{qcom,sdm845.yaml => qcom,rpmh.yaml} | 20 ++++-
.../bindings/interconnect/qcom,sc7180.yaml | 85 -------------------
2 files changed, 17 insertions(+), 88 deletions(-)
rename Documentation/devicetree/bindings/interconnect/{qcom,sdm845.yaml => qcom,rpmh.yaml} (76%)
delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
similarity index 76%
rename from Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
rename to Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 74536747b51d..6a457f914bb5 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -1,16 +1,17 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

-title: Qualcomm SDM845 Network-On-Chip Interconnect
+title: Qualcomm RPMh Network-On-Chip Interconnect

maintainers:
- Georgi Djakov <georgi.djakov@linaro.org>
+ - Odelu Kukatla <okukatla@codeaurora.org>

description: |
- SDM845 interconnect providers support system bandwidth requirements through
+ RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
able to communicate with the BCM through the Resource State Coordinator (RSC)
associated with each execution environment. Provider nodes must point to at
@@ -23,6 +24,19 @@ properties:

compatible:
enum:
+ - qcom,sc7180-aggre1-noc
+ - qcom,sc7180-aggre2-noc
+ - qcom,sc7180-camnoc-virt
+ - qcom,sc7180-compute-noc
+ - qcom,sc7180-config-noc
+ - qcom,sc7180-dc-noc
+ - qcom,sc7180-gem-noc
+ - qcom,sc7180-ipa-virt
+ - qcom,sc7180-mc-virt
+ - qcom,sc7180-mmss-noc
+ - qcom,sc7180-npu-noc
+ - qcom,sc7180-qup-virt
+ - qcom,sc7180-system-noc
- qcom,sdm845-aggre1-noc
- qcom,sdm845-aggre2-noc
- qcom,sdm845-config-noc
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
deleted file mode 100644
index d01bac80d416..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SC7180 Network-On-Chip Interconnect
-
-maintainers:
- - Odelu Kukatla <okukatla@codeaurora.org>
-
-description: |
- SC7180 interconnect providers support system bandwidth requirements through
- RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
- able to communicate with the BCM through the Resource State Coordinator (RSC)
- associated with each execution environment. Provider nodes must point to at
- least one RPMh device child node pertaining to their RSC and each provider
- can map to multiple RPMh resources.
-
-properties:
- reg:
- maxItems: 1
-
- compatible:
- enum:
- - qcom,sc7180-aggre1-noc
- - qcom,sc7180-aggre2-noc
- - qcom,sc7180-camnoc-virt
- - qcom,sc7180-compute-noc
- - qcom,sc7180-config-noc
- - qcom,sc7180-dc-noc
- - qcom,sc7180-gem-noc
- - qcom,sc7180-ipa-virt
- - qcom,sc7180-mc-virt
- - qcom,sc7180-mmss-noc
- - qcom,sc7180-npu-noc
- - qcom,sc7180-qup-virt
- - qcom,sc7180-system-noc
-
- '#interconnect-cells':
- const: 1
-
- qcom,bcm-voters:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- description: |
- List of phandles to qcom,bcm-voter nodes that are required by
- this interconnect to send RPMh commands.
-
- qcom,bcm-voter-names:
- $ref: /schemas/types.yaml#/definitions/string-array
- description: |
- Names for each of the qcom,bcm-voters specified.
-
-required:
- - compatible
- - reg
- - '#interconnect-cells'
- - qcom,bcm-voters
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interconnect/qcom,sc7180.h>
-
- config_noc: interconnect@1500000 {
- compatible = "qcom,sc7180-config-noc";
- reg = <0x01500000 0x28000>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- system_noc: interconnect@1620000 {
- compatible = "qcom,sc7180-system-noc";
- reg = <0x01620000 0x17080>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- mmss_noc: interconnect@1740000 {
- compatible = "qcom,sc7180-mmss-noc";
- reg = <0x01740000 0x1c100>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
--
2.26.1
\
 
 \ /
  Last update: 2020-07-28 04:40    [W:0.096 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site