lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [net-next v5 PATCH 0/7] Add PRP driver
From
From: Murali Karicheri <m-karicheri2@ti.com>
Date: Wed, 22 Jul 2020 10:40:15 -0400

> This series is dependent on the following patches sent out to
> netdev list. All (1-3) are already merged to net/master as of
> sending this, but not on the net-next master branch. So need
> to apply them to net-next before applying this series. v3 of
> the iproute2 patches can be merged to work with this series
> as there are no updates since then.
>
> [1] https://marc.info/?l=linux-netdev&m=159526378131542&w=2
> [2] https://marc.info/?l=linux-netdev&m=159499772225350&w=2
> [3] https://marc.info/?l=linux-netdev&m=159499772425352&w=2
>
> This series adds support for Parallel Redundancy Protocol (PRP)
> in the Linux HSR driver as defined in IEC-62439-3. PRP Uses a
> Redundancy Control Trailer (RCT) the format of which is
> similar to HSR Tag. This is used for implementing redundancy.
...

Series applied to net-next, thank you.

\
 
 \ /
  Last update: 2020-07-27 21:21    [W:0.133 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site