lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v11 0/2] ADD interconnect support for Qualcomm DWC3 driver
    Date
    This path series aims to add interconnect support in
    dwc3-qcom driver on SDM845 and SC7180 SoCs.

    Changes from v10 -> v11
    > Made the error handling symmetrical in enable and disable cases.
    > Removed empty line in interconnect-init function.

    Changes from v9 -> v10
    > Removed cooments for enable,disable functions.
    > Handled the enable,disable failure cases as in v8.

    Changes from v8 -> v9
    > Addressed comments from Matthias.

    Changes from v7 -> v8
    > Only driver change is pending all other patches are merged so dropped
    from the series.
    > Removed the device_is_bound call and getting speed from device tree
    and rearranged interconnect functions to avoid forward declarations.
    > Added patch to specify maximum speed for dwc3 DT node.

    Changes from v6 -> v7
    > [PATCH 2/4] Fixed review comments from Matthias in DWC3 driver.
    > Other patches remain unchanged.

    Changes from v5 -> v6
    > [PATCH 1/4] Addressed comments from Rob.
    > [PATCH 2/4] Fixed review comments from Matthias in DWC3 driver.
    > [PATCH 3/4] Ignoring 80 char limit in defining interconnect paths.
    > Added [PATCH 4/4] in this series. Adding interconnect nodes for SC7180.
    Depends on patch https://patchwork.kernel.org/patch/11417989/.

    Changes from v4 -> v5
    > [PATCH 1/3] Added the interconnect properties in yaml. This patch depends
    on series https://patchwork.kernel.org/cover/11372641/.
    > [PATCH 2/3] Fixed review comments from Matthias in DWC3 driver.
    > [PATCH 3/3] Modified as per the new interconnect nodes in sdm845. Depends
    on series https://patchwork.kernel.org/cover/11372211/.


    Changes from v3 -> v4
    > Fixed review comments from Matthias
    > [PATCH 1/3] and [PATCH 3/3] remains unchanged

    Changes from v2 -> v3
    > Fixed review comments from Matthias and Manu
    > changed the functions prefix from usb_* to dwc3_qcom_*

    Changes since V1:
    > Comments by Georgi Djakov on "[PATCH 2/3]" addressed
    > [PATCH 1/3] and [PATCH 3/3] remains unchanged

    Sandeep Maheswaram (2):
    usb: dwc3: qcom: Add interconnect support in dwc3 driver
    arm64: dts: qcom: sc7180: Add maximum speed property for DWC3 USB node

    arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
    drivers/usb/dwc3/dwc3-qcom.c | 120 ++++++++++++++++++++++++++++++++++-
    2 files changed, 119 insertions(+), 2 deletions(-)

    --
    QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
    of Code Aurora Forum, hosted by The Linux Foundation

    \
     
     \ /
      Last update: 2020-07-27 19:08    [W:3.759 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site