lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: Move pci_info() after pci_fixup_device() in pci_setup_device()
Date
In the current code, we can not see the PCI info after fixup which is
correct to reflect the reality, it is better to move pci_info() after
pci_fixup_device() in pci_setup_device().

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
drivers/pci/probe.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 2f66988..7c046aed 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1802,9 +1802,6 @@ int pci_setup_device(struct pci_dev *dev)
dev->revision = class & 0xff;
dev->class = class >> 8; /* upper 3 bytes */

- pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
- dev->vendor, dev->device, dev->hdr_type, dev->class);
-
if (pci_early_dump)
early_dump_pci_device(dev);

@@ -1822,6 +1819,9 @@ int pci_setup_device(struct pci_dev *dev)
/* Early fixups, before probing the BARs */
pci_fixup_device(pci_fixup_early, dev);

+ pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
+ dev->vendor, dev->device, dev->hdr_type, dev->class);
+
/* Device class may be changed after fixup */
class = dev->class >> 8;

--
2.1.0
\
 
 \ /
  Last update: 2020-07-27 09:09    [W:0.031 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site