lkml.org 
[lkml]   [2020]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] rtc: ds1307: provide an indication that the watchdog has fired
On Mon, Jul 27, 2020 at 11:13:06AM +1200, Chris Packham wrote:
> There's not much feedback when the ds1388 watchdog fires. Generally it
> yanks on the reset line and the board reboots. Capture the fact that the
> watchdog has fired in the past so that userspace can retrieve it via
> WDIOC_GETBOOTSTATUS. This should help distinguish a watchdog triggered
> reset from a power interruption.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - Set bootstatus to WDIOF_CARDRESET and let userspace decide what to do with
> the information.
>
> drivers/rtc/rtc-ds1307.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index 49702942bb08..209736db510d 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -868,6 +868,14 @@ static int ds1388_wdt_start(struct watchdog_device *wdt_dev)
> struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
> u8 regs[2];
> int ret;
> + int val;
> +
> + ret = regmap_read(ds1307->regmap, DS1388_REG_FLAG, &val);
> + if (ret)
> + return ret;
> +
> + if (val & DS1388_BIT_WF)
> + wdt_dev->bootstatus = WDIOF_CARDRESET;

This should be done during probe, ie in ds1307_wdt_register().

Guenter

>
> ret = regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
> DS1388_BIT_WF, 0);
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-07-27 05:15    [W:0.066 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site