lkml.org 
[lkml]   [2020]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] pinctrl: samsung: Use bank name as irqchip name
On Mon, Jul 20, 2020 at 4:54 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:

> From: Marek Szyprowski <m.szyprowski@samsung.com>
>
> Use the bank name as the irqchip name. This name is later visible in
> /proc/interrupts, what makes it possible to easily identify each
> GPIO interrupt.
>
> /proc/interrupts before this patch:
> 143: 0 exynos4210_wkup_irq_chip 7 Edge hdmi
> 144: 0 exynos4210_wkup_irq_chip 6 Level wm8994
> 145: 1 exynos4210_wkup_irq_chip 7 Edge max77686-pmic, max77686-rtc
> 146: 1 exynos_gpio_irq_chip 3 Edge 3-0048
>
> /proc/interrupts after this patch:
> 143: 0 gpx3 7 Edge hdmi
> 144: 0 gpx3 6 Level wm8994
> 145: 1 gpx0 7 Edge max77686-pmic, max77686-rtc
> 146: 1 gpm2 3 Edge 3-0048
>
> Handling of the eint_wake_mask_value has been reworked, because each bank
> has now its own exynos_irq_chip structure allocated.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>
> Hi Linus,
>
> I have only one patch queued for Samsung pinctrl. Can you apply it
> directly?

OK patch applied!

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2020-07-27 00:38    [W:0.074 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site