Messages in this thread Patch in this message |  | | From | Michael Walle <> | Subject | [PATCH v6 11/13] arm64: dts: freescale: sl28: enable LED support | Date | Sun, 26 Jul 2020 01:18:32 +0200 |
| |
Now that we have support for GPIO lines of the SMARC connector, enable LED support on the KBox A-230-LS. There are two LEDs without fixed functions, one is yellow and one is green. Unfortunately, it is just one multi-color LED, thus while it is possible to enable both at the same time it is hard to tell the difference between "yellow only" and "yellow and green".
Signed-off-by: Michael Walle <michael@walle.cc> --- Changes since v5: - changed the label, suggested by Pavel Machek
Changes since v4: - none
Changes since v3: - see cover letter
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 4b4cc6a1573d..8e5e289ce04f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -16,6 +16,20 @@ model = "Kontron KBox A-230-LS"; compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; + + leds { + compatible = "gpio-leds"; + + alarm-led { + label = "yellow:alarm"; + gpios = <&sl28cpld_gpio0 0 0>; + }; + + power-led { + label = "green:power"; + gpios = <&sl28cpld_gpio1 3 0>; + }; + }; }; &enetc_mdio_pf3 { -- 2.20.1
|  |