lkml.org 
[lkml]   [2020]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/2] scsi: libsas: An improvement on error handle and tidy-up
From
Date
sorry,I missed Martin's e-mail "Re: [PATCH v1 0/2] scsi: libsas: An 
improvement on error handle and tidy-up" here. Please ignore this set of
patches.

On 2020/7/25 16:18, Luo Jiaxing wrote:
> This patch introduces an improvement to reduce error handle time and a
> tidy-up, including:
> - postreset() is deleted from sas_sata_ops.
> - Do not perform hard reset and delayed retry on a removed SATA disk. This
> can effectively reduce the error handle duration of hot unplug a SATA disk
> with traffic(reduce about 30s depending on the delay setting of libata).
>
> Both John garry and Jason Yan participated in the review of the solution
> and provided good suggestions during the development.
>
> Change since v1:
> - Removed an unnecessary tag from subject.
>
> Luo Jiaxing (2):
> scsi: libsas: delete postreset at sas_sata_ops
> scsi: libsas: check link status at ATA prereset() ops
>
> drivers/scsi/libsas/sas_ata.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>

\
 
 \ /
  Last update: 2020-07-25 11:00    [W:0.023 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site