lkml.org 
[lkml]   [2020]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 5/7] ARM: dts: at91: sama5d3: add an mdio sub-node to macb
Date
Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---

Changes in v3:
- added tag from Florian

Changes in v2:
- none

arch/arm/boot/dts/at91-sama5d3_xplained.dts | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a7b362..25d2646ce4cb 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -133,8 +133,12 @@ macb0: ethernet@f0028000 {
#size-cells = <0>;
status = "okay";

- ethernet-phy@7 {
- reg = <0x7>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@7 {
+ reg = <0x7>;
+ };
};
};

@@ -200,8 +204,12 @@ macb1: ethernet@f802c000 {
#size-cells = <0>;
status = "okay";

- ethernet-phy@1 {
- reg = <0x1>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ };
};
};

--
2.25.1
\
 
 \ /
  Last update: 2020-07-24 12:52    [W:0.049 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site