lkml.org 
[lkml]   [2020]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 6/7] ARM: dts: at91: sama5d4: add an mdio sub-node to macb
Date
Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---

Changes in v3:
- added tag from Florian

Changes in v2:
- none

arch/arm/boot/dts/at91-sama5d4_xplained.dts | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 924d9491780d..62598d06aead 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -59,10 +59,14 @@ macb0: ethernet@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;

- phy0: ethernet-phy@1 {
- interrupt-parent = <&pioE>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- reg = <1>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&pioE>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ reg = <1>;
+ };
};
};

--
2.25.1
\
 
 \ /
  Last update: 2020-07-24 12:52    [W:0.072 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site