lkml.org 
[lkml]   [2020]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] iio: sx9310: Enable regulator for svdd supply
Hi,

On Thu, Jul 23, 2020 at 4:03 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Enable the digital IO power supply (svdd) during probe so that the i2c
> communication works properly on boards that aggressively power gate this
> supply.
>
> Cc: Gwendal Grignou <gwendal@chromium.org>
> Cc: Daniel Campello <campello@chromium.org>
> Cc: Hartmut Knaack <knaack.h@gmx.de>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> drivers/iio/proximity/sx9310.c | 49 ++++++++++++++++++++++++++++------
> 1 file changed, 41 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 84c3c9ae80dc..d21c17a4d541 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -19,6 +19,7 @@
> #include <linux/of.h>
> #include <linux/pm.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/slab.h>
>
> #include <linux/iio/buffer.h>
> @@ -131,6 +132,7 @@ struct sx9310_data {
> struct i2c_client *client;
> struct iio_trigger *trig;
> struct regmap *regmap;
> + struct regulator *supply;

Done need to store if you use devm. See below.


> /*
> * Last reading of the proximity status for each channel.
> * We only send an event to user space when this changes.
> @@ -914,21 +916,31 @@ static int sx9310_probe(struct i2c_client *client,
> mutex_init(&data->mutex);
> init_completion(&data->completion);
>
> + data->supply = devm_regulator_get(&client->dev, "svdd");
> + if (IS_ERR(data->supply))
> + return PTR_ERR(data->supply);
> +
> data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
> if (IS_ERR(data->regmap))
> return PTR_ERR(data->regmap);
>
> + ret = regulator_enable(data->supply);
> + if (ret)
> + return ret;
> + /* Must wait for Tpor time after initial power up */
> + usleep_range(1000, 1100);

ret = devm_add_action_or_reset(&client->dev, sx9310_regulator_disable, supply);
if (ret)
return ret;

static void sx9310_regulator_disable(void *regulator) {
regulator_disable(regulator);
}

Then drop all changes below this line.


Seems like you could add support for the other regulator listed in the
bindings, too?


-Doug

\
 
 \ /
  Last update: 2020-07-24 22:25    [W:0.067 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site