lkml.org 
[lkml]   [2020]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] usb: dwc3: Add support for VBUS power control
On Thu, Jul 23, 2020 at 09:56:14AM +0200, Vincent Whitchurch wrote:
> On Fri, Jun 19, 2020 at 04:25:12PM +0200, Mike Looijmans wrote:
> > +void dwc3_set_vbus(struct dwc3 *dwc, bool enable)
> > +{
> > + int ret;
> > +
> > + if (enable != dwc->vbus_reg_enabled) {
> > + if (enable)
> > + ret = regulator_enable(dwc->vbus_reg);
> > + else
> > + ret = regulator_disable(dwc->vbus_reg);

> dwc->vbus_reg is set to NULL when the regulator is not present. These
> regulator_* functions expect a non-NULL pointer so a NULL check is
> required before calling them.

Does the device actually support running without power so that's a thing
that can happen? _get_optional() should only ever be used for supplies
that may be physically absent.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-07-23 13:05    [W:0.107 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site