lkml.org 
[lkml]   [2020]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] fpga: dfl: add support for N3000 nios private feature
Date
This patch adds support for the nios handshake private feature on Intel
N3000 FPGA Card. This private feature provides a handshake interface to
FPGA NIOS firmware, which receives retimer configuration command from host
and executes via an internal SPI master. When nios finished the
configuration, host takes over the ownership of the SPI master to control
an Intel MAX10 BMC Chip on the SPI bus.

For NIOS firmware handshake part, this driver requests the retimer
configuration for NIOS with parameters from module param, and adds some
sysfs nodes for user to query NIOS state.

For SPI part, this driver adds a spi-altera platform device as well as
the MAX10 BMC spi slave info. A spi-altera driver will be matched to
handle following the SPI work.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
---
.../ABI/testing/sysfs-bus-dfl-devices-n3000-nios | 16 +
drivers/fpga/Kconfig | 12 +
drivers/fpga/Makefile | 2 +
drivers/fpga/dfl-n3000-nios.c | 483 +++++++++++++++++++++
4 files changed, 513 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
create mode 100644 drivers/fpga/dfl-n3000-nios.c

diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
new file mode 100644
index 0000000..8346b74
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
@@ -0,0 +1,16 @@
+What: /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns the FEC mode of the ethernet retimer
+ configured by NIOS firmware. "rs" for RS FEC mode, "kr" for
+ KR FEC mode, "no" FOR NO FEC mode.
+ Format: string
+
+What: /sys/bus/dfl/devices/dfl-fme.X.X/nios_fw_version
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns the NIOS firmware version in FPGA. Its
+ format is "major.minor.patch".
+ Format: %x.%x.%x
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index b2408a7..fa5f3ab 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -191,6 +191,18 @@ config FPGA_DFL_AFU
to the FPGA infrastructure via a Port. There may be more than one
Port/AFU per DFL based FPGA device.

+config FPGA_DFL_N3000_NIOS
+ tristate "FPGA DFL N3000 NIOS Driver"
+ depends on FPGA_DFL
+ select REGMAP
+ help
+ This is the driver for the nios handshake private feature on Intel
+ N3000 FPGA Card. This private feature provides a handshake interface
+ to FPGA NIOS firmware, which receives retimer configuration command
+ from host and executes via an internal SPI master. When nios finished
+ the configuration, host takes over the ownership of the SPI master to
+ control an Intel MAX10 BMC Chip on the SPI bus.
+
config FPGA_DFL_PCI
tristate "FPGA DFL PCIe Device Driver"
depends on PCI && FPGA_DFL
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index d8e21df..27f20f2 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -44,5 +44,7 @@ dfl-fme-objs += dfl-fme-perf.o
dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
dfl-afu-objs += dfl-afu-error.o

+obj-$(CONFIG_FPGA_DFL_N3000_NIOS) += dfl-n3000-nios.o
+
# Drivers for FPGAs which implement DFL
obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c
new file mode 100644
index 0000000..d098a10
--- /dev/null
+++ b/drivers/fpga/dfl-n3000-nios.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for DFL N3000 NIOS private feature
+ *
+ * Copyright (C) 2019-2020 Intel Corporation, Inc.
+ *
+ * Authors:
+ * Wu Hao <hao.wu@intel.com>
+ * Xu Yilun <yilun.xu@intel.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stddef.h>
+#include <linux/spi/altera.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#include "dfl.h"
+
+static char *fec_mode = "rs";
+module_param(fec_mode, charp, 0444);
+MODULE_PARM_DESC(child, "FEC mode");
+
+/* N3000 NIOS private feature registers */
+#define NIOS_SPI_PARAM 0x8
+#define SHIFT_MODE BIT_ULL(1)
+#define SHIFT_MODE_MSB 0
+#define SHIFT_MODE_LSB 1
+#define DATA_WIDTH GENMASK_ULL(7, 2)
+#define NUM_CHIPSELECT GENMASK_ULL(13, 8)
+#define CLK_POLARITY BIT_ULL(14)
+#define CLK_PHASE BIT_ULL(15)
+#define PERIPHERAL_ID GENMASK_ULL(47, 32)
+
+#define NIOS_SPI_CTRL 0x10
+#define CTRL_WR_DATA GENMASK_ULL(31, 0)
+#define CTRL_ADDR GENMASK_ULL(44, 32)
+#define CTRL_CMD GENMASK_ULL(63, 62)
+#define CMD_NOP 0
+#define CMD_RD 1
+#define CMD_WR 2
+
+#define NIOS_SPI_STAT 0x18
+#define STAT_RD_DATA GENMASK_ULL(31, 0)
+#define STAT_RW_VAL BIT_ULL(32)
+
+/* nios handshake registers, indirect access */
+#define NIOS_INIT 0x1000
+#define NIOS_INIT_DONE BIT(0)
+#define NIOS_INIT_START BIT(1)
+/* Mode for PKVL A, link 0, the same below */
+#define REQ_FEC_MODE_A0 GENMASK(9, 8)
+#define REQ_FEC_MODE_A1 GENMASK(11, 10)
+#define REQ_FEC_MODE_A2 GENMASK(13, 12)
+#define REQ_FEC_MODE_A3 GENMASK(15, 14)
+#define REQ_FEC_MODE_B0 GENMASK(17, 16)
+#define REQ_FEC_MODE_B1 GENMASK(19, 18)
+#define REQ_FEC_MODE_B2 GENMASK(21, 20)
+#define REQ_FEC_MODE_B3 GENMASK(23, 22)
+#define FEC_MODE_NO 0x0
+#define FEC_MODE_KR 0x1
+#define FEC_MODE_RS 0x2
+
+#define NIOS_FW_VERSION 0x1004
+#define NIOS_FW_VERSION_PATCH GENMASK(23, 20)
+#define NIOS_FW_VERSION_MINOR GENMASK(27, 24)
+#define NIOS_FW_VERSION_MAJOR GENMASK(31, 28)
+
+#define PKVL_A_MODE_STS 0x1020
+#define PKVL_B_MODE_STS 0x1024
+
+#define NS_REGBUS_WAIT_TIMEOUT 10000 /* loop count */
+#define NIOS_INIT_TIMEOUT 10000000 /* usec */
+#define NIOS_INIT_TIME_INTV 100000 /* usec */
+
+struct dfl_n3000_nios {
+ void __iomem *base;
+ struct regmap *regmap;
+ struct device *dev;
+ struct platform_device *altr_spi;
+};
+
+static int n3000_nios_writel(struct dfl_n3000_nios *ns, unsigned int reg,
+ unsigned int val)
+{
+ int ret;
+
+ ret = regmap_write(ns->regmap, reg, val);
+ if (ret)
+ dev_err(ns->dev, "fail to write reg 0x%x val 0x%x: %d\n",
+ reg, val, ret);
+
+ return ret;
+}
+
+static int n3000_nios_readl(struct dfl_n3000_nios *ns, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+
+ ret = regmap_read(ns->regmap, reg, val);
+ if (ret)
+ dev_err(ns->dev, "fail to read reg 0x%x: %d\n", reg, ret);
+
+ return ret;
+}
+
+static ssize_t nios_fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%x.%x.%x\n",
+ (u8)FIELD_GET(NIOS_FW_VERSION_MAJOR, val),
+ (u8)FIELD_GET(NIOS_FW_VERSION_MINOR, val),
+ (u8)FIELD_GET(NIOS_FW_VERSION_PATCH, val));
+}
+static DEVICE_ATTR_RO(nios_fw_version);
+
+static ssize_t fec_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
+ unsigned int val, mode;
+ int ret;
+
+ ret = n3000_nios_readl(ns, NIOS_INIT, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * FEC mode should always be the same for all links, as we set them
+ * in this way.
+ */
+ mode = FIELD_GET(REQ_FEC_MODE_A0, val);
+ if (mode != FIELD_GET(REQ_FEC_MODE_A1, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_A2, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_A3, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B0, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B1, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B2, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B3, val))
+ return -EFAULT;
+
+ switch (mode) {
+ case FEC_MODE_NO:
+ return sprintf(buf, "no\n");
+ case FEC_MODE_KR:
+ return sprintf(buf, "kr\n");
+ case FEC_MODE_RS:
+ return sprintf(buf, "rs\n");
+ }
+
+ return -EFAULT;
+}
+static DEVICE_ATTR_RO(fec_mode);
+
+static struct attribute *n3000_nios_attrs[] = {
+ &dev_attr_nios_fw_version.attr,
+ &dev_attr_fec_mode.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(n3000_nios);
+
+static int init_error_detected(struct dfl_n3000_nios *ns)
+{
+ unsigned int val;
+
+ if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val))
+ return true;
+
+ if (val >= 0x100)
+ return true;
+
+ if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val))
+ return true;
+
+ if (val >= 0x100)
+ return true;
+
+ return false;
+}
+
+static void dump_error_stat(struct dfl_n3000_nios *ns)
+{
+ unsigned int val;
+
+ if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val))
+ return;
+
+ dev_info(ns->dev, "PKVL_A_MODE_STS %x\n", val);
+
+ if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val))
+ return;
+
+ dev_info(ns->dev, "PKVL_B_MODE_STS %x\n", val);
+}
+
+static int n3000_nios_init_done_check(struct dfl_n3000_nios *ns)
+{
+ struct device *dev = ns->dev;
+ unsigned int val, mode;
+ int ret;
+
+ /*
+ * this SPI is shared by NIOS core inside FPGA, NIOS will use this SPI
+ * master to do some one time initialization after power up, and then
+ * release the control to OS. driver needs to poll on INIT_DONE to
+ * see when driver could take the control.
+ *
+ * Please note that after 3.x.x version, INIT_START is introduced, so
+ * driver needs to trigger START firstly and then check INIT_DONE.
+ */
+
+ ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If NIOS version register is totally uninitialized(== 0x0), then the
+ * NIOS firmware is missing. So host could take control of SPI master
+ * safely, but initialization work for NIOS is not done. This is an
+ * issue of FPGA image. We didn't error out because we need SPI master
+ * to reprogram a new image.
+ */
+ if (val == 0) {
+ dev_warn(dev, "NIOS version reg = 0x%x, skip INIT_DONE check, but PKVL may be uninitialized\n",
+ val);
+ return 0;
+ }
+
+ if (FIELD_GET(NIOS_FW_VERSION_MAJOR, val) >= 3) {
+ /* read NIOS_INIT to check if PKVL INIT done or not */
+ ret = n3000_nios_readl(ns, NIOS_INIT, &val);
+ if (ret)
+ return ret;
+
+ /* check if PKVLs are initialized already */
+ if (val & NIOS_INIT_DONE || val & NIOS_INIT_START)
+ goto nios_init_done;
+
+ /* configure FEC mode per module param */
+ val = NIOS_INIT_START;
+
+ /* FEC mode will be ignored by hardware in 10G mode */
+ if (!strcmp(fec_mode, "no"))
+ mode = FEC_MODE_NO;
+ else if (!strcmp(fec_mode, "kr"))
+ mode = FEC_MODE_KR;
+ else if (!strcmp(fec_mode, "rs"))
+ mode = FEC_MODE_RS;
+ else
+ return -EINVAL;
+
+ /* set the same FEC mode for all links */
+ val |= FIELD_PREP(REQ_FEC_MODE_A0, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A1, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A2, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A3, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B0, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B1, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B2, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B3, mode);
+
+ ret = n3000_nios_writel(ns, NIOS_INIT, val);
+ if (ret)
+ return ret;
+ }
+
+nios_init_done:
+ /* polls on NIOS_INIT_DONE */
+ ret = regmap_read_poll_timeout(ns->regmap, NIOS_INIT, val,
+ val & NIOS_INIT_DONE,
+ NIOS_INIT_TIME_INTV,
+ NIOS_INIT_TIMEOUT);
+ if (ret) {
+ dev_err(dev, "NIOS_INIT_DONE %s\n",
+ (ret == -ETIMEDOUT) ? "timed out" : "check error");
+ goto dump_sts;
+ }
+
+ /*
+ * after INIT_DONE is detected, it still needs to check if any ERR
+ * detected.
+ * We won't error out here even if error detected. Nios will release
+ * spi controller when INIT_DONE is set, so driver could continue to
+ * initialize spi controller device.
+ */
+ if (init_error_detected(ns)) {
+ dev_warn(dev, "NIOS_INIT_DONE OK, but err found during init\n");
+ goto dump_sts;
+ }
+ return 0;
+
+dump_sts:
+ dump_error_stat(ns);
+
+ return ret;
+}
+
+struct spi_board_info m10_n3000_info = {
+ .modalias = "m10-n3000",
+ .max_speed_hz = 12500000,
+ .bus_num = 0,
+ .chip_select = 0,
+};
+
+static int create_altr_spi_controller(struct dfl_n3000_nios *ns)
+{
+ struct altera_spi_platform_data pdata = { 0 };
+ struct platform_device_info pdevinfo = { 0 };
+ void __iomem *base = ns->base;
+ u64 v;
+
+ v = readq(base + NIOS_SPI_PARAM);
+
+ pdata.mode_bits = SPI_CS_HIGH;
+ if (FIELD_GET(CLK_POLARITY, v))
+ pdata.mode_bits |= SPI_CPOL;
+ if (FIELD_GET(CLK_PHASE, v))
+ pdata.mode_bits |= SPI_CPHA;
+
+ pdata.num_chipselect = FIELD_GET(NUM_CHIPSELECT, v);
+ pdata.bits_per_word_mask =
+ SPI_BPW_RANGE_MASK(1, FIELD_GET(DATA_WIDTH, v));
+
+ pdata.num_devices = 1;
+ pdata.devices = &m10_n3000_info;
+
+ dev_dbg(ns->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
+ pdata.num_chipselect, pdata.bits_per_word_mask,
+ pdata.mode_bits);
+
+ pdevinfo.name = "subdev_spi_altera";
+ pdevinfo.id = PLATFORM_DEVID_AUTO;
+ pdevinfo.parent = ns->dev;
+ pdevinfo.data = &pdata;
+ pdevinfo.size_data = sizeof(pdata);
+
+ ns->altr_spi = platform_device_register_full(&pdevinfo);
+ return PTR_ERR_OR_ZERO(ns->altr_spi);
+}
+
+static void destroy_altr_spi_controller(struct dfl_n3000_nios *ns)
+{
+ platform_device_unregister(ns->altr_spi);
+}
+
+static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
+{
+ int loops = NS_REGBUS_WAIT_TIMEOUT;
+
+ /*
+ * Usually the state changes in few loops, so we try to be simple here
+ * for performance.
+ */
+ do {
+ *v = readq(base + NIOS_SPI_STAT);
+ if (*v & STAT_RW_VAL)
+ break;
+ cpu_relax();
+ } while (--loops);
+
+ return loops ? 0 : -ETIMEDOUT;
+}
+
+static int ns_bus_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ void __iomem *base = context;
+ u64 v = 0;
+
+ v |= FIELD_PREP(CTRL_CMD, CMD_WR);
+ v |= FIELD_PREP(CTRL_ADDR, reg);
+ v |= FIELD_PREP(CTRL_WR_DATA, val);
+ writeq(v, base + NIOS_SPI_CTRL);
+
+ return ns_bus_poll_stat_timeout(base, &v);
+}
+
+static int ns_bus_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+ void __iomem *base = context;
+ u64 v = 0;
+ int ret;
+
+ v |= FIELD_PREP(CTRL_CMD, CMD_RD);
+ v |= FIELD_PREP(CTRL_ADDR, reg);
+ writeq(v, base + NIOS_SPI_CTRL);
+
+ ret = ns_bus_poll_stat_timeout(base, &v);
+ if (!ret)
+ *val = FIELD_GET(STAT_RD_DATA, v);
+
+ return ret;
+}
+
+static const struct regmap_config ns_regbus_cfg = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+
+ .reg_write = ns_bus_reg_write,
+ .reg_read = ns_bus_reg_read,
+};
+
+static int dfl_n3000_nios_probe(struct dfl_device *dfl_dev)
+{
+ struct device *dev = &dfl_dev->dev;
+ struct dfl_n3000_nios *ns;
+ int ret;
+
+ ns = devm_kzalloc(dev, sizeof(*ns), GFP_KERNEL);
+ if (!ns)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dfl_dev->dev, ns);
+
+ ns->dev = dev;
+
+ ns->base = devm_ioremap_resource(&dfl_dev->dev, &dfl_dev->mmio_res);
+ if (IS_ERR(ns->base)) {
+ dev_err(dev, "get mem resource fail!\n");
+ return PTR_ERR(ns->base);
+ }
+
+ ns->regmap = devm_regmap_init(dev, NULL, ns->base, &ns_regbus_cfg);
+ if (IS_ERR(ns->regmap))
+ return PTR_ERR(ns->regmap);
+
+ ret = n3000_nios_init_done_check(ns);
+ if (ret)
+ return ret;
+
+ ret = create_altr_spi_controller(ns);
+ if (ret)
+ dev_err(dev, "altr spi controller create failed: %d\n", ret);
+
+ return ret;
+}
+
+static void dfl_n3000_nios_remove(struct dfl_device *dfl_dev)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(&dfl_dev->dev);
+
+ destroy_altr_spi_controller(ns);
+}
+
+#define FME_FEATURE_ID_N3000_NIOS 0xd
+
+static const struct dfl_device_id dfl_n3000_nios_ids[] = {
+ { FME_ID, FME_FEATURE_ID_N3000_NIOS },
+ { }
+};
+
+static struct dfl_driver dfl_n3000_nios_driver = {
+ .drv = {
+ .name = "dfl-n3000-nios",
+ .dev_groups = n3000_nios_groups,
+ },
+ .id_table = dfl_n3000_nios_ids,
+ .probe = dfl_n3000_nios_probe,
+ .remove = dfl_n3000_nios_remove,
+};
+
+module_dfl_driver(dfl_n3000_nios_driver);
+
+MODULE_DEVICE_TABLE(dfl, dfl_n3000_nios_ids);
+MODULE_DESCRIPTION("DFL N3000 NIOS driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2020-07-24 04:13    [W:0.102 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site