lkml.org 
[lkml]   [2020]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Some sx9310 iio driver updates
Date
These three patches are only related because I'm looking at this driver.
The first one resend the DT binding for the driver that was merged in
v5.8-rc1 with a small change to update for proper regulators. The second
patch fixes a few printks that are missing newlines and should
be totally non-trivial to apply. The final patch adds support to enable
the svdd supply so that this driver can work on a board I have where the
svdd supply isn't enabled at boot and needs to be turned on before this
driver starts to communicate with the chip.

Daniel Campello (1):
dt-bindings: iio: Add bindings for sx9310 sensor

Stephen Boyd (2):
iio: sx9310: Add newlines to printks
iio: sx9310: Enable regulator for svdd supply

.../iio/proximity/semtech,sx9310.yaml | 60 +++++++++++++++++++
drivers/iio/proximity/sx9310.c | 59 ++++++++++++++----
2 files changed, 106 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Daniel Campello <campello@chromium.org>

base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407
--
Sent by a computer, using git, on the internet

\
 
 \ /
  Last update: 2020-07-24 01:05    [W:0.040 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site