lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] ARM: dts: rockchip: Add usb host0 ohci node for rk3288
Date
Hi Jaganm

Am Montag, 20. Juli 2020, 12:58:46 CEST schrieb Jagan Teki:
> rk3288 and rk3288w have a usb host0 ohci controller.
>
> Although rk3288 ohci doesn't actually work on hardware, but
> rk3288w ohci can work well.
>
> So add usb host0 ohci node in rk3288 dtsi and the quirk in
> ohci platform driver will disable ohci on rk3288.

If I remember the discussion correctly, we expect the board dts
or the bootloader to enable the ohci, right?
So that block go away ... just making sure, I don't remember
untrue stuff ;-)


Heiko


> Cc: William Wu <william.wu@rock-chips.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - none
>
> arch/arm/boot/dts/rk3288.dtsi | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 0cd88774db95..f0774d9afb67 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -614,7 +614,16 @@ usb_host0_ehci: usb@ff500000 {
> status = "disabled";
> };
>
> - /* NOTE: ohci@ff520000 doesn't actually work on hardware */
> + /* NOTE: doesn't work on RK3288, but fixed on RK3288W */
> + usb_host0_ohci: usb@ff520000 {
> + compatible = "generic-ohci";
> + reg = <0x0 0xff520000 0x0 0x100>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_USBHOST0>;
> + phys = <&usbphy1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
>
> usb_host1: usb@ff540000 {
> compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
>




\
 
 \ /
  Last update: 2020-07-22 20:35    [W:0.061 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site