lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH devicetree 0/4] Add Seville Ethernet switch to T1040RDB
Date
Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver. The driver has been accepted
this release cycle and is currently available in net-next (and
therefore, in linux-next).

This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.

Vladimir Oltean (4):
powerpc: dts: t1040: add bindings for Seville Ethernet switch
powerpc: dts: t1040: label the 2 MDIO controllers
powerpc: dts: t1040rdb: put SGMII PHY under &mdio0 label
powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

arch/powerpc/boot/dts/fsl/t1040rdb.dts | 123 +++++++++++++++++++-
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 79 ++++++++++++-
2 files changed, 194 insertions(+), 8 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-07-22 19:26    [W:4.484 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site