lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] pinctrl: core: print gpio in pins debugfs file
On Wed, Jul 22, 2020 at 1:29 AM Drew Fustini <drew@beagleboard.org> wrote:
>
> If there is a gpio range mapping for the pin, then print out the gpio
> chip and line index for the pin in the debugfs 'pins' file with the
> format: "[line-index]:[gpio-label]"
>
> Here is an example output on the BeagleBoard.org PocketBeagle (AM3358):
> /sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single/pins
>
> pin 25 (PIN25) 25:gpio-32-63 44e10864 00000037 pinctrl-single
> pin 26 (PIN26) 26:gpio-32-63 44e10868 00000037 pinctrl-single
> pin 27 (PIN27) 27:gpio-32-63 44e1086c 00000037 pinctrl-single
> pin 28 (PIN28) 0:N/A 44e10870 00000036 pinctrl-single
> pin 29 (PIN29) 0:N/A 44e10874 00000006 pinctrl-single
> pin 30 (PIN30) 28:gpio-32-63 44e10878 00000027 pinctrl-single
> pin 31 (PIN31) 29:gpio-32-63 44e1087c 00000037 pinctrl-single
> pin 32 (PIN32) 30:gpio-32-63 44e10880 00000037 pinctrl-single
> pin 33 (PIN33) 31:gpio-32-63 44e10884 00000037 pinctrl-single
> pin 34 (PIN34) 0:gpio-64-95 44e10888 00000037 pinctrl-single
> pin 35 (PIN35) 1:gpio-64-95 44e1088c 00000037 pinctrl-single
>

This variant looks good enough to me, thanks! FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Suggested-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Drew Fustini <drew@beagleboard.org>
> ---
> drivers/pinctrl/core.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> v4 change:
> - can format to be integer first as Andy suggested it will make parsing
> easier
>
> v3 change:
> - gpio column is now gpiochip label and line index
>
> v2 changes:
> - print 'NA' if pin does not have a GPIO number
> - change gpio_num from unsigned to unsigned int per checkpatch
>
>
> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
> index 821242bb4b16..39e74cdf5c7d 100644
> --- a/drivers/pinctrl/core.c
> +++ b/drivers/pinctrl/core.c
> @@ -27,6 +27,7 @@
> #include <linux/pinctrl/machine.h>
>
> #ifdef CONFIG_GPIOLIB
> +#include "../gpio/gpiolib.h"
> #include <asm-generic/gpio.h>
> #endif
>
> @@ -1601,6 +1602,9 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
> struct pinctrl_dev *pctldev = s->private;
> const struct pinctrl_ops *ops = pctldev->desc->pctlops;
> unsigned i, pin;
> + struct pinctrl_gpio_range *range;
> + unsigned int gpio_num;
> + struct gpio_chip *chip;
>
> seq_printf(s, "registered pins: %d\n", pctldev->desc->npins);
>
> @@ -1618,6 +1622,23 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
>
> seq_printf(s, "pin %d (%s) ", pin, desc->name);
>
> +#ifdef CONFIG_GPIOLIB
> + gpio_num = 0;
> + list_for_each_entry(range, &pctldev->gpio_ranges, node) {
> + if ((pin >= range->pin_base) &&
> + (pin < (range->pin_base + range->npins))) {
> + gpio_num = range->base + (pin - range->pin_base);
> + break;
> + }
> + }
> + chip = gpio_to_chip(gpio_num);
> + if (chip && chip->gpiodev && chip->gpiodev->base)
> + seq_printf(s, "%u:%s ", gpio_num -
> + chip->gpiodev->base, chip->label);
> + else
> + seq_puts(s, "0:N/A ");
> +#endif
> +
> /* Driver-specific info per pin */
> if (ops->pin_dbg_show)
> ops->pin_dbg_show(pctldev, s, pin);
> --
> 2.25.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-07-22 10:50    [W:0.040 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site